The gate-source voltage is Es = 16 V and the load line has a slope of 128 V/A. Calculate the gate current for an average gate power dissipation of 0.5 W.

The gate-source voltage is Es = 16 V and the load line has a slope of 128 V/A. Calculate the gate current for an average gate power dissipation of 0.5 W. Correct Answer 62.5 mA

Load line is nothing but Rs Es = 16V Vg.Ig = 0.5 Rs = 128 We have Es = Ig x Rs + Vg.
Bissoy MCQ

Related Questions

Find the average gate power dissipation (Pgav) when the maximum allowable gate power dissipation (Pgm) = 10 kW, with a duty cycle = 50 %.
Find the triggering frequency when the average gate power dissipation = 0.3 W and the peak gate drive power is 5 Watts. The gate source has a pulse width of 20 μsec duration.
average gate power dissipation for an SCR is 0.5 Watts the voltage applied to the gate is Vg = 10 V. What is the maximum value of current Ig for safe operation?
Which one of the following equations most directly determines the power dissipation of a resistance when you know the power dissipation of a resistance when you know the voltage drop and current?
For a Zener diode shunt regulator, the source current is IS, the Zener diode current is IZ and the load current is IL. The source voltage is VS, Zener voltage is VZ and load voltage is VL. The load resistance is RL. What is the correct option for the safe operation of the diode?
A single wattmeter is connected to measure the reactive power of a three-phase, three-wire balanced load. The line current is 17A and the line voltage is 440V. Calculate the power factor of the load if the reading of the wattmeter is 4488 VAR.
A dc power supply has no-load voltage of 30v,and a full-load voltage of 25v at full-load current of 1A.Its output resistance & load regulation ,respectively are
The ratio of bed slope and the slope of energy line is 2, calculate the value of slope of energy line if the length of back water curve is 20000m. Given: E1=2m and E2=5m.
If dy/dx=3×10-4 m and the ratio of bed slope and slope of energy line is 0.7, calculate the value of slope of energy line if the uniform flow depth is 1.6m, critical depth is 1.2m.
A Zener regulator has to handle supply voltage variation from 19.5V to 22.5V. Find the magnitude of regulating resistance, if the load resistance is 6KΩ. The Zener diode has the following specifications: breakdown voltage =18V, (IZ)Min=2µA, maximum power dissipation=60mW and Zener resistance =20Ω.