Bissoy.com
Doctors Medicines MCQs Q&A

If the temperature would be 25°C then what would be the corresponding output on the LM35 Temperature Sensor?

If the temperature would be 25°C then what would be the corresponding output on the LM35 Temperature Sensor? Correct Answer 250mV

The temperature sensitivity of the LM35 Temperature Sensor Module is 10mV/°C which means that the value of the voltage output will increase linearly with the increase in the surrounding temperature, or in other words it is linearly proportional. Hence if the temperature outside is 25°C then the output would be (10×25)mV or 250mV.

Related Questions

Statement (I): To use a sensor, we generally need to add signal conditioning circuitry, such as circuits which amplify and convert from analog to digital, to get the sensor signal in the right form, take account of any non-linearities, and calibrate it. Statement (II): A smart sensor is integrated with the required buffering and conditioning circuitry in a single element and provides functions beyond that of just a sensor.
A displacement sensor (a dial indicator) measures the lateral displacement of a mandrel mounted on the taper hole inside a drill spindle. The mandrel axis is an extension of the drill spindle taper hole axis and the protruding portion of the mandrel surface is perfectly cylindrical measurements are taken with the sensor placed at two positions P and Q as shown in the figure. The readings are recorded as Rx = maximum deflection minus minimum deflection, corresponding to sensor position at X, over one rotation. If RP = RQ > 0, which one of the following would be consistent with the observation?
What is the temperature for LM35 sensor if the analog output is 0011 1001?
What should come in place of question mark (?) in the following question? 2.3̅9̅ + 5 + 6.2̅5̅ + 0.0̅8̅ = ?
A system provides output yi(t) when xi(t) is applied. If the system is said to be LTI then which of the following properties must satisfy? (i).If the input is x3 = ax1(t) + bx2(t), then output must be y3(t) = ay1(t) + by2(t) (ii).If the input is x(t – T), then the output must be y (t – T) (iii).If the input is x3 = ax1(t) + bx2(t), then output must be y3(t) = ay1(t) * by2(t) (iv).If the input is x(t – T), then the output must be y(t + T)
What is the maximum temperature value that the LM35 Temperature Sensor Module can read?
What is the minimum temperature that the LM35 Temperature Sensor Module can read?
What is the formula for obtaining the temperature value in degrees centigrade from the LM35 Temperature Sensor while using an ADC?
What is the approximate self heating temperature of the LM35 Temperature Sensor Module?
Wages of the workers are normally, the proportionality derived from their efficiency. But the concept of efficiency of labour is itself vague such as amount of physical output, output per man hour or output per man shift. But output is not the function of man alone. There are other factors which affect the output. Which among the following is/are not the factor(s) that would affect the output directly?
1. Physical condition of work
2. Nature of machinery
3. Technical process
4. Quality of raw material
5. System of management
6. Role of fellow workers
7. Competitors in the market