Bissoy.com
Doctors Medicines MCQs Q&A

Which among the following is not used to characterize air interface mode?

Which among the following is not used to characterize air interface mode? Correct Answer RF Access

Efficiency of spatial use is estimated by link budget. The efficiency of spectrum usage can be computed from frequency band, modulation type, and bandwidth of air interface mode. Noise figure and range variations are also included in the computation of link budget.

Related Questions

Post office protocol (POP) is a message access protocol which is used to extract message for client. In this regard, which of the following are true ? (A) POP has two modes, Delete mode and keep (B) In Delete mode, mail is deleted from mail box after each retrival (C) In Delete mode, mail is deleted from mail box before each retrieval (D) In keep mode, mail is deleted before retrival (E) In keep mode, mail remains in mail box after retrival Choose the correct answer from the options given below:
India has been constantly negotiating for an expansion in the trade in services via Mode 4 as defined under the General Agreement on Trade in Services (GATS). Consider the following pairings regarding different modes of Services under GATS of the WTO: 1. Mode 1 : Cross-Border Supply of Services 2. Mode 2 : Temporary cross-border movement of a natural person to consume services abroad 3. Mode 3 : Cross-border provision of services via the commercial presence of a company in another country 4. Mode 4 : Temporary cross-border movement of service providers Which of the above are correctly paired?
In MPFI-Air Induction System, the air cleaner, the air flow meter, the throttle body and the air valve supply a proper amount of air to the air intake chamber and intake manifold.
Suppose saturated polar air has an air temperature and dew point of -10o C, and unsaturated desert air has an air temperature of 35o C and a dew point of 10o C. The desert air contains ______ water vapour and has a ________ relative humidity than the polar air.
You are installing a network interface card on a computer with the following configuration: a 5867133 CPU, 16MB or RAM, a 800-MB IDE hard disk, a parallel port configured as LPT1, and a serial port configured as COM1, which is currently used by a mouse. In addition to the IDE host adapter and the video card, the following devices have been installed on the computer's expansion bus: a modem on COM2, a SCSI host adapter for a CD-ROM drive, and a sound card. The SCSI hose adapter is using IRQ 5, and the sound card is using IRQ 11. The network interface card that you are installing supports the following choices for IRQ: 2, 3, 4, 5, 9,10 and 11. Which IRQ(s) could you use for the network interface card without creating an IRQ conflict with another device?
In the following question, sentences of a paragraph have been jumbled and labelled as A, B, C and D. You are required to rearrange the jumbled sentences of the paragraph and mark your response accordingly by selecting the correct option. A: Air conditioning is the process of removing heat and moisture from the interior of an occupied space to improve the comfort of occupants. Air conditioning can be used in both domestic and commercial environments.  B: Electric refrigerant-based AC units range from small units that can cool a small bedroom, which can be carried by a single adult, to massive units installed on the roof of office towers that can cool an entire building. C: Air conditioners often use a fan to distribute the conditioned air to an enclosed space such as a building or a car to improve thermal comfort and indoor air quality.  D: This process is most commonly used to achieve a more comfortable interior environment, typically for humans and other animals.
Consider the following statements: 1. The relative humidity of air does not change with temperature as long as specific humidity remains constant. 2. Dew-point temperature is the temperature at which condensation begins when air is cooled at constant volume. 3. Saturated air passing over a water surface does not cause change of air temperature. 4. For saturated air, dry-bulb, wet-bulb and dew-point temperatures are identical. Which of the above statements are correct?
In an accident a container containing ethanol(s.g 0.789) falls down in a room of dimension 1*1*2(all in m). Ethanol forms a layer of 2mm. Ethanol vaporizes and diffuses through a stagnant film of air of thickness 2.5mm. What will be the time required for the water layer to disappear completely. The diffusivity of ethanol in air is 2.567*10-5 m2/s. the total pressure is 1.013 bar and the pressure of ethanol in bulk air is 0.02244 bar and at the ethanol-air interface is 0.02718bar. The temperature is 25.2°C.
A stream of air at 100 kPa pressure and 300 K is flowing on the top surface of a thin flat sheet of solid naphthalene of length 0.2 m with a velocity of 20 m/sec. The other data are: Mass diffusivity of naphthalene vapor in air = 6 * 10 –6 m2/sec Kinematic viscosity of air = 1.5 * 10 –5 m2.sc Concentration of naphthalene at the air-solid naphthalene interface = 1 * 10 – 5 kmol/m3 Calculate the overage mass transfer coefficient over the flat plate. Note: For heat transfer over a flat plate, convective heat transfer coefficient for laminar flow can be calculated by the equation. Nu = 0.664 ReL1/2 Pr1/3 you may use analogy between mass and heat transfer.
Consider the statements given below- A: Relationship between Mean, Median and Mode is : Mode = 3 Median – 2 Mean B: It is also possible that there can be more than one mode or no mode for a data set. C: In a data set, half of the data points are smaller than the median and half of the data points are larger. Which of the above statement(s) is/are TRUE?