Bissoy.com
Doctors Medicines MCQs Q&A

How to remove the dc term produced along with the output in frequency doubler?

How to remove the dc term produced along with the output in frequency doubler? Correct Answer Use a capacitor between load and output terminal

The output of the frequency doubler contains a dc term and wave of double frequency. The dc term can be easily removed by using a 1µF coupling capacitor between load and output terminal of the doubler circuit.

Related Questions

If the input power for a frequency doubler is 10.7 mW and the output measured after the frequency doubling process is 21 mW, then the conversion gain for the frequency doubler is:
A rider is riding his bike along the sides of a square ground. He drives the bike with the speed of 10 km/h along one side, 15 km/h along another side, 18 km/h along the third side, and 20 km/h along the last side and reaches the starting point. What is the average speed of the bike along the sides of the ground?
An input of Vsinωt is applied to an ideal frequency doubler. Compute its output voltage? × . b) Vo = × . c) Vo = × . d) Vo = × .
In an AM system receiver. the mixer translates the carrier frequency fc to a fixed intermediate frequency of 450 kHz. Given a broadcast signal of frequency 900 kHz. What is the corresponding image frequency when a superhetrodyne receiver is employed with local oscillator frequency greater than the broadcast signal frequency?
Wages of the workers are normally, the proportionality derived from their efficiency. But the concept of efficiency of labour is itself vague such as amount of physical output, output per man hour or output per man shift. But output is not the function of man alone. There are other factors which affect the output. Which among the following is/are not the factor(s) that would affect the output directly?
1. Physical condition of work
2. Nature of machinery
3. Technical process
4. Quality of raw material
5. System of management
6. Role of fellow workers
7. Competitors in the market
In an arithmetic progression (AP), the 9th term is 5 times the 2nd term and the 8th term is 1 more than 10 times the first term. What is the 4th term of the geometric progression (GP) whose first term is the second term of AP and whose common ratio is equal to the common difference of AP?
The different age group people go for a morning walk. The age of 20 people who go for a morning walk is as follows: 19, 15, 34, 45, 69, 74, 24, 67, 77, 89, 91, 45, 65, 35, 56, 67, 55, 23, 78, 52 The Grouped frequency distribution table of above will be: (A)  S. No Class Frequency 1 0-20 2 2 20-40 4 3 40-60 5 4 60-80 7 5 80-100 2 (B)  S. No Class Frequency 1 0-20 3 2 20-40 3 3 40-60 5 4 60-80 6 5 80-100 3 (C) S. No Class Frequency 1 0-20 2 2 20-40 4 3 40-60 5 4 60-80 5 5 80-100 4 (D) S. No Class Frequency 1 0-20 2 2 20-40 7 3 40-60 2 4 60-80 7 5 80-100 2
A source of unknown frequency gives 4 beats / s, when sounded with a source of known frequency 250 Hz. The second harmonic of the source of unknown frequency gives five beats per second, when sounded with a source of frequency 513 Hz. The unknown frequency is:
In active power and frequency control, a. Frequency should remain constant b. A considerable drop in frequency could result in low magnetizing currents in induction motors and transformers. c. The frequency of a system is dependent on reactive power balance. d. Relatively closed control of frequency ensures constancy of the speed of induction motors. Which of the above statements are incorrect?
The frequency response of the filter in the stop band. i. Decreases with increase in frequency ii. Increase with increase in frequency iii. Decreases with decrease in frequency iv. Increases with decrease in frequency