Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Given collector resistance = 2kΩ, load resistance = 5kΩ, collector capacitance = 1μF, emitter capacitance = 20μF, collector current = 2mA, source resistance = 2kΩ. If the effect of blocking capacitor is ignored, find the applicable cut-off frequency.
If the input applied to DAC using current to voltage converter is 10110100, determine the reference voltage (Assume Io= 2mA and R1=1.2kΩ)
For the given circuit, input resistance RI = 20Ω, hfe = 50. Output resistance = ∞. Find the new values of input and output resistance, if a base resistance of 2kΩ is added to the circuit.
In the Zener controlled series regulator shown below, find the current through the Zener diode. Given that the Zener diode breakdown voltage is 5V, the source voltage is 15V, the output voltage is 10V, R4 = 2kΩ, β=99, R1=2kΩ.
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.
Consider a voltage series feedback network, where amplifier gain = 100, feedback factor = 5. For the basic amplifier, input voltage = 4V, input current=2mA. Find the input resistance of the network.
Find the input and output resistance for the circuit shown. Specification for 741 op-amp : A=400000 ; Ri = 33MΩ; Ro = 60Ω; RF = 11kΩ; R1 = 2kΩ; Supply voltage = ± 15v; Maximum output voltage swing = ± 13v.
A system provides output yi(t) when xi(t) is applied. If the system is said to be LTI then which of the following properties must satisfy? (i).If the input is x3 = ax1(t) + bx2(t), then output must be y3(t) = ay1(t) + by2(t) (ii).If the input is x(t – T), then the output must be y (t – T) (iii).If the input is x3 = ax1(t) + bx2(t), then output must be y3(t) = ay1(t) * by2(t) (iv).If the input is x(t – T), then the output must be y(t + T)
Determine the full scale range for the input voltage if the resistance in series with meters are 1kΩ, 2kΩ, 47kΩ and full scale meter movement is 1mA in low voltage AC voltmeter?
In the circuit shown, supply voltage = ±15v, Va= +3v , Vb= -4v , Vc= +5v, R= R1= 1kΩ and RF= 2kΩ. 741 op-amp has A= 2×105 and R1= 10kΩ. Determine the output voltage internal resistance of the circuit?