Bissoy.com
Doctors Medicines MCQs Q&A

Extended interaction oscillator is a ________ beam oscillator that is similar to klystron.

Extended interaction oscillator is a ________ beam oscillator that is similar to klystron. Correct Answer Linear beam

Extended interaction oscillator is a linear beam oscillator that uses an interaction region consisting of several cavities coupled together, with positive feedback to support oscillation.

Related Questions

Consider the following statements regarding Bunching process in Klystron: 1. Bunching occurs in two cavity Klystron amplifiers 2. Bunching occurs in multi cavity Klystron amplifiers 3. Bunching occurs in reflex Klystron oscillators Which of these statements are correct?
Klystron requires _______ for the klystron beam and up to _____ for the klystron reflector.
Consider the following statements with regards to the shear force diagram for the beam ABCD: 1. The beam ABCD is an overhanging beam having supports at A and D only. 2. The beam carries a point load of 20 kN at C. 3. The beam carries a concentrated load of 10 kN at the end B. 4. The beam is an overhanging beam having supports at C and D only. 5. The beam carries a uniformly distributed load of 70 kN over the left hand portion AC only. Which of the above statements are correct?
Consider the following statements regarding types of supports and beams: 1. When both supports of beams are roller supports, the beam is known as simply supported beam. 2. A beam with one end fixed and the other end free is known as fixed beam. 3. A beam with both ends fixed is known as cantilever beam. 4. A beam with one end fixed and the other simply supported is known as propped cantilever. Which of the above statements is/are correct ?
Consider the following statements related to oscillator circuits : 1. The tank circuit of a Hartley oscillator is made up of a tapped capacitor and a common inductor. 2. The tank circuit of a Colpitts oscillator is made up of a tapped capacitor and a common oscillator. 3. The Wien Bridge oscillator is essentially a two-stage amplifier with an RC bridge in the first stage, and, the second stage serving as an inverter. 4. Crystal oscillators are fixed frequency oscillators with a high Q-factor.  Which of the following are true?
Consider the following statements: 1. Additional cavities serve to velocity-modulate the electron beam and produce an increase in the energy available at the output. 2. The addition of intermediate cavities between the input and output cavities of the basic klystron greatly improves the amplification, power output, and efficiency of the klystron. Which of the above statements is/are correct?
The klystron tube used in a klystron amplifier is a _________ type beam amplifier.
In which of the following cases, there exists the situation of Pure Bending in some part of the beam or along the entire beam? i) A simply supported beam subjected to two equally spaced downward concentrated loads ii) A simply supported beam subjected to two equally spaced opposite moments iii) A cantilever beam subjected to clockwise moment at free end iv) An overhanging beam with both side overhangs subjected to different concentrated loads at both the free ends
________ is a single cavity klystron tube that operates as on oscillator by using a reflector electrode after the cavity.
Steps given are to draw an involute of a given triangle ABC. Arrange the steps. i. With C as centre and radius C1 draw arc cutting AC-extended at 2. ii. With A as center and radius A2 draw an arc cutting BA- extended at 3 completing involute. iii. B as centre with radius AB draw an arc cutting the BC- extended at 1. iv. Draw the given triangle with corners A, B, C.