Bissoy.com
Doctors Medicines MCQs Q&A

The value of transmission co efficient when a transmission line is matched to a load is:

The value of transmission co efficient when a transmission line is matched to a load is: Correct Answer 1

Transmission co-efficient is defined as the ratio of the incident power to transmitted power at the load end. When the transmission line is matched, the incident power is completely transmitted. Hence, transmission co-efficient is 1.

Related Questions

When a transmission line of characteristic impedance(50Ω) zₒ is matched to a load by a λ/4 transmission line of characteristic impedance 100Ω, then the transmission co efficient is:
If the transmission co-efficient T₁ of a transmission line is 1.333 and the characteristic impedance of the λ/4 transmission line used is 100Ω, then the characteristic impedance of the transmission line is:
If a transmission line of zₒ=50Ω is matched using λ/4 transmission line of z₁=100Ω, then the transmission co efficient T₂ is:
Ramesh is 70% more efficient than Rakesh, but 20% less efficient than Vijay. If Rakesh is 40% more efficient than Suresh, and Vijay is 15% less efficient than Dinesh, then Dinesh is what percent more efficient than Suresh?
Consider the following statement: 1. Initial load tests and routine load tests are carried out on test piles and working Piles, respectively. 2. In a pile load test, the allowable load can be taken equal to half the ultimate load at which the total settlement amounts to one-tenth of the pile diameter. 3. In a pile load test, the allowable load can be taken equal to two-thirds of the total toad which causes a plastic settlement of 6 mm. Which of the above statements are correct?
If a λ/4 transmission line is 100Ω is used to match a transmission line to a load of 100Ω, then the characteristic impedance of the transmission line is:
For a lossy transmission line, γ=0.02+j0.15 and is 20m long. The line is terminated with an impedance of a 400Ω. Then the input impedance of the transmission line given that the characteristic impedance of the transmission line is 156.13+j11.38Ω is:
The value of reflection co efficient when a transmission line is matched to the load is:
A transmission line of pure resistance characteristic impedance is terminated with an unknown load. The measured value of VSWR on the line is 2 and a voltage minimum point is found to be at the load. The load impedance is then
If a transmission line of characteristic impedance 50 Ω is to be matched to a load of 100Ω, then the characteristic impedance of the ƛ/4 transmission line to be used is: