Bissoy.com
Doctors Medicines MCQs Q&A

Determine the sensitivity of the overall transfer function for the system shown in the figure below, at w=1 rad/sec with respect to the feedback path transfer function.

Determine the sensitivity of the overall transfer function for the system shown in the figure below, at w=1 rad/sec with respect to the feedback path transfer function. Correct Answer -1.11

S = -G(s)H(s)/1+G(s)H(s) = -1.11.

Related Questions

Consider the following statements with respect to the feedback from the control systems: 1. The feedback can improve stability or be harmful to stability if it is not properly applied. 2. The feedback can always improve stability. 3. In many situations, the feedback can reduce the effect of noise and disturbance on system performance. 4. In general, the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located. Select the correct statements.
Consider the following statements with respect to the feedback of the control systems. i. Feedback can improve stability or be harmful to stability if it is not properly applied. ii. Feedback can always improve stability iii. In many situations the feedback can reduce the effect of noise and disturbance on system performance. iv. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Consider the following statements with respect to the feedback of the control systems: 1. Feedback can improve stability or be harmful to stability if it is not properly applied. 2. Feedback can always improve stability 3. In many situations the feedback can reduce the effect of noise and disturbance on system performance. 4. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Consider a measuring system consisting of a sensor, an amplifier and an oscilloscope. The sensitivity of each equipment is as follows : Sensor sensitivity : 0.4 mV/°C, Amplifier gain : 5.0 V/mV, and Oscilloscope sensitivity : 10 mV/V. What is the sensitivity of complete measurement system ?
Which of the following statements are comes for Network Critical Path? 1. The path of critical activities, which links the start and end events is critical path 2. It is the path of activities having zero float 3. It is the path of events having zero slack 4. The sum of the duration of the critical activities along a critical path gives the duration of the Project
The block diagram of a feedback compensated system is given below: Which of the following statements are correct? a) When Kt = 0, the feedback compensation is in-effective and the system is uncompensated b) When Kt = 0, the feedback compensation is most effective and system is compensated c) The performance of the compensated system depends on Kt and T d) The performance of the compensated system does not depend on T
Consider the circuit shown below. Consider A: Current-shunt feedback B: Current-series feedback C: Voltage-shunt feedback D: Voltage-series feedback Which of the above are present?
A unity feedback control system is characterized by the open-loop transfer function \(G\left( s \right) = \frac{{10K\left( {s + 2} \right)}}{{{s^3} + 3{s^2} + 10}}\) The Nyquist path and the corresponding Nyquist plot of G(s) are shown in the figures below. If 0 < K < 1, then the number of poles of the closed-loop transfer function that lie in the right-half of the s-plane is
A sample of an ideal gas is taken through the cyclic process abca as shown in the figure. The change in the internal energy of the gas along the path ca is -180 J. The gas absorbs 250 J of heat along the path ab and 60 J along the path bc. The work done by the gas along the path abc is:
Assertion (A): A linear, negative feedback control system is invariable stable if its open loop configuration is stable Reason (R): the negative feedback reduces the overall gain of the feedback.