Bissoy.com
Doctors Medicines MCQs Q&A

DH surface emitter generally give ____________

DH surface emitter generally give ____________ Correct Answer More coupled optical power

The optical power coupled into a fiber depends on distance, alignment between emission area and fiber, SLED emission pattern and medium between emitting area and fiber. All these parameters if considered, reduces refractive index mismatch and increases external power efficiency thus providing more coupled optical power.

Related Questions

A transistor is used in common emitter mode as an amplifier. Then a. The base-emitter junction is forward biased b. The base-emitter junction is reverse biased  c. The input signal is connected in series with the voltage applied to the base-emitter junction  d. The input signal is connected in series with the voltage applied to bias the base-collector junction Which of the following statement is true?
In a grounded-emitter transistor, when emitter current becomes zero in cut-of region the emitter potential is called
For a narrow base PNP BJT, the excess minority carrier concentrations (ΔnE for emitter, ΔpB for base, ΔnC for collector) normalized to equilibrium minority carrier concentrations (nE0 for emitter, pB0 for base, nC0 for collector) in the quasi-neutral emitter, base and collector regions are shown below. Which one of the following biasing modes is the transistor operating in?
For transistor action (a) Base, emitter, and collector regions should have similar size and doping concentrations. (b) The base region must be very thin and lightly doped. (c) The emitter-base junction is forward biased and the base-collector junction is reverse biased. (d) Both the emitter-base junction as well as the base-collector junction are forward biased. Which one of the following pairs of statements is correct?
Choose the right option among the alternatives – A transistor conducts in its forward direction when its collector/emitter/base, is positive with respect to its collector/emitter/base, and when a turn-on voltage or current signal is applied to its collector/emitter/base.
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface)
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where $${I_{\text{G}}}$$ = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface and x = Depth of centre of gravity of the immersed surface from the liquid surface)
Which of the following statements is/are correct? 1. The earth is nearest to the Sun at Perihelion, which generally occurs on January 3. 2. The earth is farthest away from the Sun at Perihelion, which generally occurs on July 4. 3. The earth is farthest away from the Sun at Aphelion, which generally occurs on July 4. 4. The earth is nearest to the Sun at Aphelion, which generally occurs on January 3. Select the correct answer using the code given below:
Consider an enclosure formed by three surfaces having the following values of shape factors, emissivities and temperatures Surface 1 i.e. curved cylindrical has an emissivity 0.75 and temperature 800 K Surface 2 i.e. closing disc has an emissivity 0.8 and temperature 700 K Surface 3 i.e. closing disc has an emissivity 0.8 and temperature 700 K The closing flat discs are 25 mm in diameter and they have interspacing distance equal to 100 mm. If the shape factor between these two identical discs is 0.05, calculate the net rate of radiant heat flow from the curve surface to each of the closing end surface
A finned surface consists of root or base area of 1m2 and fin surface area of 2m2. The average heat transfer coefficient for finned surface is 20W/m2K effectiveness of fins provided is 0.75. If finned surface with surface with root or base temperature of 50°C is transferring heat to fluid of 30°C, then the rate of heat transfer without using fin is _______