Bissoy.com
Doctors Medicines MCQs Q&A

Helical antenna is mainly used for ________

Helical antenna is mainly used for ________ Correct Answer satellite tracking

A helical antenna is made of one or more conducting wires wound in the form of a helix. It is used for the communication (transmitting and receiving) Very High Frequency (VHF) signals through the different layers of atmosphere. Thus, it is used in satellite tracking.

Related Questions

What is the pitch angle of the helical antenna to become a loop antenna?
What is the pitch angle of the helical antenna to become a linear antenna?
The radiation pattern of the helical antenna is a combination of small dipole and loop antenna.
Kritika once standing near the main gate of her building which is of 11 stories found the angle of elevation to be 30° to the top of the cable antenna which is fixed on her terrace. She moved 50m in a straight line parallel to her feet towards the antenna and she found that angle of elevation changed to 45°. Find the height of the antenna from the ground?
A rectangular horn antenna has an aperture area of 3λ × 2λ. If the aperture efficiency of an antenna is 90%, then the directivity of the antenna is:
A radio link has 15 W transmitter connected to an antenna of 2.5 m2 effective aperture at 5 GHz. The receiving antenna has an effective aperture of 0.5 m2 and is located at a 15 Km line of sight distance from transmitting antenna. Assuming lossless, matched antennas, the power delivered to the receiver is:
The electrical size of antenna is increased by antenna array to avoid size lobes compared to single antenna.
Helical antenna is used to obtain ________ polarization.
If the spacing between turns of the helical antenna is zero then it acts as a ________
Consider the following statements: In case of helical gears, teeth are cut at an angle to the axis of rotation of the gears. 1) Helix angle introduces another ratio called axial contact ratio. 2) Transverse contact ratio is equal to axial contact ratio in helical gears. 3) Large transverse contact ratio does not allow multiple teeth to share the load. 4) Large axial contact ratio will cause larger axial force component Which of the above statements are correct?