Bissoy.com
Doctors Medicines MCQs Q&A

In a regular cone, the angle between base and slanting surface is 60 degrees and the base diameter is 75 mm. If a helix is to be build on such a cone up to half of cones height with 6 revolutions in it. Pitch of the helix is?

In a regular cone, the angle between base and slanting surface is 60 degrees and the base diameter is 75 mm. If a helix is to be build on such a cone up to half of cones height with 6 revolutions in it. Pitch of the helix is? Correct Answer 5.4

Height of cone = diameter/2 x tan (angle) = 75/2 x tan (60) = 129.9mm/2= 64.95 mm. Half height is 32.475 mm. Helix made 6 revolution is this height so one revolution height is 32.475/6 = 5.4 mm which is the pitch of the helix.

Related Questions

In a regular cone, the angle between base and slanting surface is 45 degrees and the base diameter is 100 mm. If a helix is to be built on such a cone with a pitch of 5. How many revolutions do the helix made in this cone?
The base diameter of a conical helix is 100 mm. The angle between the base and slanting side is 45 degrees. Pitch of helix is 5 mm. What is the height of helix and number of revolutions?
The base diameter of a conical helix is 80 mm. The angle between the base and slanting side is 60 degrees. Pitch of helix is 6 mm. What is the height of helix and number of revolutions?
Base diameter of conical helix is 50 mm, height of helix is 30 mm, angle between the base and slanting side of cone is 60 degrees. What is the top end diameter of the helix?
Given below are three quantities named 1, 2 and 3. Based on the given information, you have to determine the relation among the three quantities. You should use the given data and knowledge of Mathematics to choose between the possible answer. The options represent the relations among three quantities. A. < B. > C. ≤ D. ≥ E. = Quantity 1: There is a square field of side 4 meter. A flower bed is to be prepared in its centre, leaving a gravelled path of uniform length around the flowerbed. The cost of preparing the flowerbed and gravelling the path is Rs. 100 and Rs. 200 per square meter respectively. If the total cost is Rs. 1756 then find the double of  width of gravelled path. Quantity 2: The height of a cone is 45 cm. A small cone is cut from it parallel to the base. If the ratio of volume of small cone and the remaining part is 8 : 19 then what is the height from the base from where the cone was cut? Quantity 3: A cylindrical container of radius 60 cm and height 150 cm is filled with ice cream. 10 cones of equal volume need to be prepared from the whole ice-cream. These cones has hemispherical top and the height of the conical portion is 4 times the radius of hemisphere. Find radius of the hemisphere. 
Base diameter of conical helix is 80 mm, height of spring is 30 mm, angle between the base and slanting side of cone is 45 degrees and diameter of wire is 4 mm. What is the outer diameter at a top edge of spring?
Base diameter of a conical helix is 60 mm, height of spring is 30 mm, angle between the base and slanting side of cone is 45 degrees and diameter of wire is 3 mm. What is the outer diameter at the top edge of spring?
The sum and difference of the slant height and height of cone A are in the ratio 3 ∶ 1, while the sum and difference of the slant height and height of cone Y are in the ratio 5 ∶ 1. If the volume of cone A is 30% of the volume of cone B, then the height of cone A is what percentage of the height of cone B.
“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m. 
The base diameter of a conical helix is 120 mm and other end diameter is 70 mm. The height of helix is 40 mm. What is the angle between the base and slanting side is?