Bissoy.com
Doctors Medicines MCQs Q&A

In a SCFG, each production of a non-terminal symbol has an associated probability for giving rise to the resulting product, and there are a set of productions, each giving a different result.

In a SCFG, each production of a non-terminal symbol has an associated probability for giving rise to the resulting product, and there are a set of productions, each giving a different result. Correct Answer True

For example, the production S1 → C S2 G could also be represented by 15 other base-pair combinations, and each of these has a corresponding probability. Thus, each production can be considered to be represented by a probability distribution over the possible outcomes.

Related Questions

Read the information given below and answer the questions that follows by choosing the most appropriate option. Three friends, A, B and C travel to work by only one mode of transport each - bus, train or car. They each work for a different company - angle Productions, Cosmos Pvt. Ltd., Hattrick Houses.  A DOES NOT work for Angle Productions and travels by either train or bus. Either B or C works for Hattrick Houses. The person who works for Angle Productions travels by car. B travels by train. Which of the following combinations is correct?
An Identity Card has the number ABCDEFG, not necessarily in that order, where each letter represents a distinct digit (1, 2, 4, 5, 7, 8, 9 only). The number is divisible by 9. After deleting the first digit from the right, the resulting number is divisible by 6. After deleting two digits from the right of original number, the resulting number is divisible by 5. After deleting three digits from the right of original number, the resulting number is divisible by 4. After deleting four digits from the right of original number, the resulting number is divisible by 3. After deleting five digits from the right of original number, the resulting number is divisible by 2. Which of the following is a possible value for the sum of the middle three digits of the number?
Arrange the following steps in sequence in order to calculate the probability of an event through Naïve Bayes classifier. I. Find the likelihood probability with each attribute for each class. II. Calculate the prior probability for given class labels. III. Put these values in Bayes formula and calculate posterior probability. IV. See which class has a higher probability, given the input belongs to the higher probability class.
Given Checklist: i) G has no useless symbols ii) G has no unit productions iii) G has no epsilon productions iv) Normal form for production is violated Is it possible for the grammar G to be in CNF with the following checklist?
The given bar graph represents data of the production of paper (in ten lakh tonnes) by three different companies X, Y and Z during the years 2008 to 2012. The x-axis shows the 'years' and the y-axis represents the 'production of paper (ten lakh tonnes)'. (Note: The data shown is only for mathematical exercise. They do not represent actual figures.)  The total production of Company Y during 2008 and 2009 and Company X for 2011 and 2012 taken together is p% (p is correct to the nearest integer) more than the total production of Company Z during 2010, 2011 and 2012. The total production of Company Z during 2008 and 2009 taken together is q% (q is correct to the nearest integer) less than the total production of Company X during 2008, 2009 and 2012 and Company Y during 2010 and 2011 all together.  What is the positive difference between p and q ? 
A cam should be designed only using uniform rise and fall within half of the cam, the remaining is dwell period, and without any dwell period in between the rise -fall periods and rise and fall periods should be same. The maximum rise in follower is 30 mm. How much the follower will rise when the follower is 120 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within half of the cam, the remaining is dwell period, and without any dwell period in between the rise-fall periods and rise and fall periods should be same. The maximum rise in follower is 45 mm. How much the follower will rise when the follower is 45 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within the second half of cam profile, the first half is dwell period, without any dwell period in between the rise and fall periods and rise and fall periods should be same. The maximum rise in follower is 45 mm. How much the follower will rise when the follower is 120 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within the second half of cam profile, the first half is dwell period, without any dwell period in between the rise and fall periods and rise and fall periods should be same. The maximum rise in follower is 55 mm. How much the follower will rise when the follower is 240 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within first half of cam profile, the remaining is dwell period, and without any dwell period in between the rise-fall periods and rise and fall periods should be same. The maximum rise in follower is 35 mm. How much the follower will rise when the follower is 240 degrees from its initial position of a cam?