Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In the following figure, the transmitter Tx sends a wideband modulated RF signal via a coaxial cable to the receiver Rx. The output impedance ZT of Tx, the characteristic impedance Z0 of the cable, and the input impedance ZR of Rx are all real. Which one of the following statements is TRUE about the distortion of the received signal due to impedance mismatch?
After conjugate impedance matching the input impedance used for matching after normalization was 1+j with the characteristic impedance of the transmission line being 100Ω, then the generator impedance must have been:
Two single phase transformers A and B are operating in parallel having different impedance and identical x/r ratio. Impedance of A is Za and impedance of B is Zb, both sharing a load of Sl. Then the load shared by transformer A is?
Two single phase transformers A and B are operating in parallel having different impedance and identical x/r ratio. Impedance of A is Za and impedance of B is Zb, both sharing a load of Sl. Then the load shared by transformer B is?
The primary impedance of a transformer is 60 ohm and the secondary impedance is 120 ohm. What is the impedance ratio?
If source impedance is complex, then maximum power transfer occurs when the load impedance is _______ the source impedance.
The characteristic impedance of the transmission line if the outer diameter and inner diameter of the transmission line is 20 mm and 10 mm respectively, given the intrinsic impedance of the medium is 377 Ω, then the characteristic impedance of the transmission line is:
Expression for input impedance of a transmission line in terms of load impedance and characteristic impedance is:
If a transmission line of a characteristic impedance 100 Ω is terminated with a load impedance of 300+j200 Ω, then the normalized load impedance is:
If the normalized load impedance of a transmission line is 0.3-j0.4 with a characteristic impedance of 50 Ω, then the load impedance is: