Bissoy.com
Doctors Medicines MCQs Q&A

If a transmission line of a characteristic impedance 100 Ω is terminated with a load impedance of 300+j200 Ω, then the normalized load impedance is:

If a transmission line of a characteristic impedance 100 Ω is terminated with a load impedance of 300+j200 Ω, then the normalized load impedance is: Correct Answer 3+2j

Normalized load impedance is obtained by dividing the load impedance with the characteristic impedance of the transmission line. Dividing 300+200j from 100, we get 3+2j.

Related Questions

For a lossy transmission line, γ=0.02+j0.15 and is 20m long. The line is terminated with an impedance of a 400Ω. Then the input impedance of the transmission line given that the characteristic impedance of the transmission line is 156.13+j11.38Ω is:
If the transmission co-efficient T₁ of a transmission line is 1.333 and the characteristic impedance of the λ/4 transmission line used is 100Ω, then the characteristic impedance of the transmission line is:
The characteristic impedance of the transmission line if the outer diameter and inner diameter of the transmission line is 20 mm and 10 mm respectively, given the intrinsic impedance of the medium is 377 Ω, then the characteristic impedance of the transmission line is:
A transmission line of pure resistance characteristic impedance is terminated with an unknown load. The measured value of VSWR on the line is 2 and a voltage minimum point is found to be at the load. The load impedance is then
If the normalized load impedance of a transmission line is 0.3-j0.4 with a characteristic impedance of 50 Ω, then the load impedance is:
When a transmission line of characteristic impedance(50Ω) zₒ is matched to a load by a λ/4 transmission line of characteristic impedance 100Ω, then the transmission co efficient is:
For a λ/2 transmission line, if the characteristic impedance of the line is 50 Ω and the terminated with a load of 100 Ω, then its input impedance is:
If the power delivered to a load is 0.04w, then the normalized generator impedance if the source use is 4V at 2GHz and the generator impedance is real and characteristic impedance of the transmission line is 50Ω is:
If a transmission line of characteristic impedance 50 Ω is to be matched to a load of 100Ω, then the characteristic impedance of the ƛ/4 transmission line to be used is:
If a load of 10Ω has to be matched to a transmission line of characteristic impedance of 50Ω, then the characteristic impedance of the matching section of the transmission line is: