Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following is used to transfer the data from the DMA controller to the destination?

Which of the following is used to transfer the data from the DMA controller to the destination? Correct Answer data bus

The data bus is used for the transmission of data from the DMA controller to the destinal. The DMA controller can directly select the peripheral in some cases in which the data transfer is made from the peripheral to the memory.

Related Questions

On a non-pipelined sequential processor, a program segment, which is a part of the interrupt service routine, is given to transfer 500 bytes from an I/O device to memory.     Initialize the address register     Initialize the count to 500 LOOP: Load a byte from device     Store in memory at address given by address register     Increment the address register     Decrement the count     If count! = 0 go to LOOP Assume that each statement in this program is equivalent to a machine instruction which takes one clock cycle to execute if it is a non-load/store instruction. The load-store instructions take two clock cycles to execute. The designer of the system also has an alternate approach of using the DMA controller to implement the same transfer. The DMA controller requires 20 clock cycles for initialization and other overheads. Each DMA transfer cycle takes two clock cycles to transfer one byte of data from the device to the memory. What is the approximate speedup when the DMA controller based design is used in place of the interrupt driven program based input-output?
To indicate the I/O device that its request for the DMA transfer has been honored by the CPU, the DMA controller pulls
Consider the following statements. I. Daisy chaining is used to assign priorities in attending interrupts. II. When a device raises a vectored interrupt, the CPU does polling to identify the source of interrupt. III. In polling, the CPU periodically checks the status bits to know if any device needs its attention. IV. During DMA, both the CPU and DMA controller can be bus masters at the same time. Which of the above statements is/are TRUE?
Consider the following statements: 1. Integral controller improves steady state response 2. By use of proportional controller, maximum peak overshoot decreases 3. Type and order of system reduces by one for derivative controller 4. Integral controller makes the system less stable in transient state due to oscillations Select the correct answer using the codes given below:
Which fields are contained within an IEEE Ethernet frame header?
1. Source and destination MAC address
2. Source and destination network address
3. Source and destination MAC address and source and destination network address
4. FCS field
Which of the following statements are true?
Statement I Big data refers to no precise quantity, but generally refers to data in the range of Petabytes and Exabyte, i.e. billions to trillions of records, all from various sources. Big data is generated much faster. than traditional data in much larger quantities.
Statement II Big data interests industries because they are able to learn more patterns and curious variances than smaller data sets, with the capability to provide valuable insights into consumer behaviour, weather systems, financial market activity, or other phenomena.
Statement III Various departments and product lines use various applications within most organisations and store data in separate datasets. These separate databases may contain similar data, but data from one data base to another is not always consistent. This is called data silo.
In a closed loop system, the process to be controlled is an integrating process with transfer function $$\frac{1}{{2{\text{s}}}}.$$ The controller proposed to be used in an integral controller with transfer function $$\frac{1}{{{{\text{T}}_1}{\text{s}}}}.$$  When a step change in set point is applied to such a closed loop system, the controlled variable will exhibit
If Raj travels at speed of 24 km/hr, he reaches his destination 15 minutes late, however if he travels at speed of 26 km/hr, he reaches his destination 20 minutes early. Find the time taken by Raj to reach destination if he travels at speed of 13 km/hr.
Which of the following can be adopted for the systems which does not contain DMA controller for data transmission?
In which one of the following modes does the DMA controller keep control of the bus until all the data has been transferred to (from) memory from (to) the peripheral device ?