Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Wages of the workers are normally, the proportionality derived from their efficiency. But the concept of efficiency of labour is itself vague such as amount of physical output, output per man hour or output per man shift. But output is not the function of man alone. There are other factors which affect the output. Which among the following is/are not the factor(s) that would affect the output directly?
1. Physical condition of work
2. Nature of machinery
3. Technical process
4. Quality of raw material
5. System of management
6. Role of fellow workers
7. Competitors in the market
A 1 to 8 demultiplexer with data input Din, address inputs S0, S1, and S2, (with S0  as the LSB) and Y̅0 to Y̅ 7 as the eight de-multiplexed output, is to be designed using two 2 to 4 decoders (with enable input E and address input A0 and A1) as shown in the figure. Din, S0, S1, and S2 are to be connected to P, Q, R, and S but not necessarily in this order. The respective input connections to P, Q, R, and S terminals should be
In designing a 2 to 1 demultiplexer with input d, output y and select line s, which of the following is a correct process statement?
The inputs/outputs of an analog multiplexer/demultiplexer are ____________
A system provides output yi(t) when xi(t) is applied. If the system is said to be LTI then which of the following properties must satisfy? (i).If the input is x3 = ax1(t) + bx2(t), then output must be y3(t) = ay1(t) + by2(t) (ii).If the input is x(t – T), then the output must be y (t – T) (iii).If the input is x3 = ax1(t) + bx2(t), then output must be y3(t) = ay1(t) * by2(t) (iv).If the input is x(t – T), then the output must be y(t + T)
What is the output after compile and run the following code ? int Output = 10;
boolean b = false;
if((b == true) && ((Output += 10) == 20))
{
System.out.println("We are equal " + Output);
}
else
{
System.out.println("Not equal! " + Output);
}
A demultiplexer is also known as
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   Consider the following digital circuits. 1. Multiplexers 2. Read Only Memories 3. D-latch 4. Circuit as shown in figure below Which of these come under the class of combinational circuits?
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count there by reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification.   A ROM is to be used to implement a “Squarer”, which outputs the square of a 3-bit number. What must be the size of the ROM?
Based on the paragraph given below answer the following question: The traditional methods of combinational circuits involve simplification and realization using gates. Using these methods, complex functions have been integrated and are easily available in IC form. There is an attractive array of devices like a multiplexer, demultiplexer, decoders, comparators, parity generators/checkers, which significantly reduce IC package count thereby reducing the system cost. The system design is greatly simplified because the laborious and time-consuming simplification methods are generally not required with these devices. This also improves the reliability of the system by reducing the number of external wired connections. But they have some limitations as well. Different memories like ROM, PROM can also be used to implement combinational circuits without much simplification. In a BCD Subtractor if the sum of minuend and the nine’s complement of the subtrahend is not a valid BCD Code, then which binary number is added to the sum to get the correct answer?