Bissoy.com
Doctors Medicines MCQs Q&A

Due to the Collector feedback mechanism, the transistor remains always remains in the __________

Due to the Collector feedback mechanism, the transistor remains always remains in the __________ Correct Answer Active mode

The collector feedback configuration helps to keep the transistor in the active region. This is done because the bias voltage can get changed if the input and the bias voltage is superposed. With the introduction of this feedback mechanism, the transistor always stays biased in the active region.

Related Questions

Consider the following statements with respect to the feedback from the control systems: 1. The feedback can improve stability or be harmful to stability if it is not properly applied. 2. The feedback can always improve stability. 3. In many situations, the feedback can reduce the effect of noise and disturbance on system performance. 4. In general, the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located. Select the correct statements.
Consider the following statements with respect to the feedback of the control systems. i. Feedback can improve stability or be harmful to stability if it is not properly applied. ii. Feedback can always improve stability iii. In many situations the feedback can reduce the effect of noise and disturbance on system performance. iv. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Consider the following statements with respect to the feedback of the control systems: 1. Feedback can improve stability or be harmful to stability if it is not properly applied. 2. Feedback can always improve stability 3. In many situations the feedback can reduce the effect of noise and disturbance on system performance. 4. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Thermal runaway in a transistor biased in the active region is due to 1. heating of the transistor. 2. change in β due to an increase in temperature. 3. change in reverse collector saturation current due to a rise in temperature. 4. base-emitter voltage VBE which decreases with rise in temperature. Which of the above statements is/are correct?
For a narrow base PNP BJT, the excess minority carrier concentrations (ΔnE for emitter, ΔpB for base, ΔnC for collector) normalized to equilibrium minority carrier concentrations (nE0 for emitter, pB0 for base, nC0 for collector) in the quasi-neutral emitter, base and collector regions are shown below. Which one of the following biasing modes is the transistor operating in?
For transistor action (a) Base, emitter, and collector regions should have similar size and doping concentrations. (b) The base region must be very thin and lightly doped. (c) The emitter-base junction is forward biased and the base-collector junction is reverse biased. (d) Both the emitter-base junction as well as the base-collector junction are forward biased. Which one of the following pairs of statements is correct?
Choose the right option among the alternatives – A transistor conducts in its forward direction when its collector/emitter/base, is positive with respect to its collector/emitter/base, and when a turn-on voltage or current signal is applied to its collector/emitter/base.
The total thermal resistance of a power transistor and heat sink is 20°C/W. The ambient temperature is 25°C and (TJ)MAX=200°C. If VCE=4V, find the maximum collector current that the transistor can carry without destruction. What will be the allowed value of collector current if ambient temperature rises to 75°C?
Consider an NMOS transistor having kn= 2 mA/V2. Let the transistor be biased at VOV = 1V. For operation in saturation, what dc bias current ID results? If a +0.1-V signal is superimposed on VGS, find the corresponding increment in collector current by evaluating the total collector current ID and subtracting the dc bias current ID.
Match the following Types of mechanism Motion achieved P. Scott Russel mechanism 1. Intermittent motion Q. Geneva mechanism 2. Quick return motion R. Off set slider crank mechanism 3. Simple harmonic motion S. scotch Yoke mechanism 4. Straight line motion