Bissoy.com
Doctors Medicines MCQs Q&A

In constant voltage drop model diode in forward bias is considered as a ________________

In constant voltage drop model diode in forward bias is considered as a ________________ Correct Answer Perfect conductor

In constant voltage drop model the diode is considered as a perfect conductor in forward bias and perfect insulator in reverse bias. That is voltage drop at forward bias is zero and current through the diode at reverse bias is zero. In this model at forward bias diode can be replaced as a cell and in reverse bias diode can be avoided by considering the terminals are open.

Related Questions

Which of the following conditions must be satisfied for a transistor to be in saturation? 1. Its collector to base junction should be under forward bias 2. Its collector to base junction should be under reverse bias 3. Its emitter to base junction should be under reverse bias 4. Its emitter to base junction should be under forward bias Which of the above conditions are correct?
If CT is the transition capacitance, which of the following are true? 1) in forward bias, CT dominates 2) in reverse bias, CT dominates 3) in forward bias, diffusion capacitance dominates 4) in reverse bias, diffusion capacitance dominates
Calculate the forward bias current of a Si diode when forward bias voltage of 0.4V is applied, the reverse saturation current is 1.17×10-9A and the thermal voltage is 25.2mV.
Voltage drop produced by a diode at forward bias in ideal diode model is equal to ___________
In the figure, D1 is a real silicon p-n junction diode with a drop of 0.7 V under forward bias condition and D2 is a Zener diode with breakdown voltage of -6.8 V. The input Vin(t) is a periodic square wave of period T, whose one period is shown in the figure. Assuming 10τ ≪ T, where τ is the time constant of the circuit, the maximum and minimum values of the output waveform are respectively,
In the given circuit input voltage V1 is -3V and V2 is -1V. The resistance R1 is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The approximate current I is _________ (Use piecewise linear model of diode)
In the given circuit input voltage V is 2V and VB is 1V. The resistance R1 and R2 is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The current I will be (Use piecewise linear model of diode)
In the given circuit input voltage V is 3V and VB is 1V. The resistance R1 and R2 is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The current I will be (Use piecewise linear model of diode)
In the given circuit input voltage Vin is 3V and VB is 1V. The resistance R is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The current I will be? (Use piecewise linear model of diode)
Which of the following statements are correct for an ideal constant voltage source? 1. Its output voltage remains absolutely constant whatever the change in load current. 2. It possesses zero internal resistance so that internal voltage drop in the source is zero. 3. Output voltage is provided by the source would remain constant irrespective of the amount of current drawn from it. 4. Output voltage provided by the source varies with the amount of current drawn from it.