Bissoy.com
Doctors Medicines MCQs Q&A

In the given circuit input voltage Vin is 3V and VB is 1.5V. The resistance R is 1.5K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The Voltage V will be ____________

In the given circuit input voltage Vin is 3V and VB is 1.5V. The resistance R is 1.5K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The Voltage V will be ____________ Correct Answer 3V

In piecewise linear model, we can consider diode as a voltage source of 0.5V along with an ideal diode. VIN being applied is 3V, which is greater than 1.5-0.5 V, and hence the diode is reverse biased and input appears at output.

Related Questions

In the given circuit input voltage Vin is 3V and VB is 1V. The resistance R is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The current I will be? (Use piecewise linear model of diode)
In the given circuit input voltage Vin is 3V and V2 is 1V. The resistance R1 is 1.5K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The current I will be __________
In the circuit shown below voltage Vin is 3V and VB is 1V. The resistor R1 and R2 are 1K. Assume both diodes are identical. Forward bias resistance is 10Ω. Cut-in voltage of diode is 0.7V. The voltage Vout is __________
In the circuit shown below voltage Vin is -3V and VB is -1V. The resistor R1 and R2 are 1K. Assume both diodes are identical. Forward bias resistance is 10Ω. Cut-in voltage of diode is 0.7V. The voltage Vout is __________
In the circuit shown below voltage Vin is 3V and VB1 is -1V and VB2 is 1V. Assume both diodes are identical. Cut-in voltage of diode is 0.7V. Forward bias resistance is 10Ω. The voltage Vout is __________
In the given circuit input voltage V is 2V and VB is 1V. The resistance R1 and R2 is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The current I will be (Use piecewise linear model of diode)
In the given circuit input voltage V is 3V and VB is 1V. The resistance R1 and R2 is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The current I will be (Use piecewise linear model of diode)
In the circuit shown below voltage Vin is -3V and VB is -2V. The resistor R is 1K. Cut-in voltage of diode is 0.7V. Forward bias resistance is 10Ω. The voltage V is __________
In the given circuit input voltage V1 is -3V and V2 is -1V. The resistance R1 is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The approximate current I is _________ (Use piecewise linear model of diode)
In the figure, D1 is a real silicon p-n junction diode with a drop of 0.7 V under forward bias condition and D2 is a Zener diode with breakdown voltage of -6.8 V. The input Vin(t) is a periodic square wave of period T, whose one period is shown in the figure. Assuming 10τ ≪ T, where τ is the time constant of the circuit, the maximum and minimum values of the output waveform are respectively,