Bissoy.com
Doctors Medicines MCQs Q&A

A Link Control Protocol (LCP) is used for ____________

A Link Control Protocol (LCP) is used for ____________ Correct Answer Establishing, configuring and testing the data-link connection

The Link Control Protocol (LCP) is the part of PPP that is used for establishing, configuring and testing the data-link connection. The other two components are Network Control Protocol and Encapsulation.

Related Questions

Consider the following three statements about link state and distance vector routing protocols, for a large network with 500 network nodes and 4000 links. [S1] The computational overhead in link state protocols is higher than in distance vector protocols. [S2] A distance vector protocol (with split horizon) avoids persistent routing loops, but not a link state protocol. [S3] After a topology change, a link state protocol will converge faster than a distance vector protocol. Which one of the following is correct about S1, S2, and S3?
Which of the following is/are the advantages of using a control chart for inspection? (i) A control chart indicates whether the process is in control or out of control. (ii) A control chart determines process variability. (iii) A control chart ensures product quality. (iv) Scrap or percentage reduction can be reduced by taking the necessary actions in time against the warnings indicated by control charts. (v) Control charts build up the reputation of the organization through customer’s satisfaction. (vi) The control chart can detect the unusual variations taking place in a process.
The magnitude of absolute angular velocity of link 2 is 10 rad/s while that of link 3 is 6 rad/s, what is the angular velocity of link 3 relative to link 2?
A 4-bar mechanism with all revolute pairs has link lengths lf = 20 mm, lin = 40 mm, lco = 50 mm and lout = 60 mm. The suffixes 'f', 'in', 'co' and 'out' denote the fixed link, the input link, the coupler and output link respectively. Which one of the following statements is true about the input and output links?
The link necessarily begins and ends with this phase. During the ______ phase, the LCP automata will be in INITIAL or STARTING states.
Consider the following statements regarding the OSI model: 1. Application layer provides the control structure for communication between applications; establishes, manages and terminates connections between cooperating applications. 2. Data link layer provides for the reliable transfer of information across the physical link. 3. Transport layer provides end-to-end error recovery and flow control of data. Which of the above statements are correct?
In a drag link quick return mechanism, the shortest link is always fixed. The sum of the shortest and longest link is
Under which of the following conditions is Coriolis component encountered in the relative acceleration of two points ? 1. The two points are coincident but on different links. 2. The point on one link traces a path on the other link. 3. The link that contains the path rotates. Select the correct answer using the code given below :
Consider the following statements: 1. The voltage developed across the OFF switches of the half-bridge converter is the maximum dc-link voltage. 2. In the full-bridge converter, the voltage across the primary of the transformer is the dc link voltage. 3. The voltage developed across the OFF switches of the full-bridge converter is half the maximum dc-link voltage. Which of the above statements are correct?
Frames of 1000 bits are sent over a 106 bps duplex link between two hosts. The propagation time is 25 ms. Frames are to be transmitted into this link to maximally pack them in transit (within the link). What is the minimum number of bits (i) that will be required to represent the sequence numbers distinctly? Assume that no time gap needs to be given between the transmission of two frames.