Bissoy.com
Doctors Medicines MCQs Q&A

As a system administrator, you need to set up one Ethernet interface on the Cisco router to allow for both sap and Novell-ether encapsulations. Which set of commands will accomplish this?

As a system administrator, you need to set up one Ethernet interface on the Cisco router to allow for both sap and Novell-ether encapsulations. Which set of commands will accomplish this? Correct Answer Interface Ethernet 0.1ipx encapsulation Novell-ether IPX network 9e interface Ethernet 0.2 IPX encapsulation sap IPX network 6c

The following commands setup the sub interfaces to allow for two types of encapsulation:interface Ethernet 0.1 IPX encapsulation Novell-ether IPX network 9e interface Ethernet0.2 IPX encapsulation sap IPX network 6c.

Related Questions

You have your laptop directly connected into a router's Ethernet port. Which of the following are among the requirements for the copy flash tftp command to be successful?
1. TFTP server software must be running on the router.
2. TFTP server software must be running on your laptop.
3. The Ethernet cable connecting the laptop directly into the router's Ethernet port must be a straight-through cable.
4. The laptop must be on the same subnet as the router's Ethernet interface.
5. The copy flash tftp command must be supplied the IP address of the laptop.
Network 206.143.5.0 was assigned to the Acme Company to connect to its ISP. The administrator of Acme would like to configure one router with the commands to access the Internet. Which commands could be configured on the Gateway router to allow Internet access to the entire network?
1. Gateway (config) # ip route 0.0.0.0 0.0.0.0 206.143.5.2
2. Gateway (config) # router rip
3. Gateway (config-router) # network 206.143.5.0
4. Gateway (config-router) # network 206.143.5.0 default
You get a call from a network administrator who tells you that he typed the following into his router:
Router (config) #router ospf 1Router (config-router) #network 10.0.0.0 255.0.0.0 area 0
He tells you he still can't see any routes in the routing table. What configuration error did the administrator make?
You need to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface of the router for this connection?
You are setting up a network in a school. You need to network 5 computers for the file and printer sharing. You want to use some donated cable and Ethernet adapters. You identify the donated adapters as ARCnet coaxial network adapters and 10Base2 Ethernet network adapters. You install an Ethernet adapter in each of the 5 computers and connect the donated cable. The computers are NOT able to maintain reliable communication. You suspect that you are NOT using the correct type of coaxial cable. Which type of coaxial cable should you be using?
You have an interface on a router with the IP address of 192.168.192.10/29. Including the router interface, how many hosts can have IP addresses on the LAN attached to the router interface?
A group of 2m - 1 routers are interconnected in a centralized binary tree, with router at each tree node. Router I communicate with router J by sending a message to the root of the tree. The root then sends the message back down to J. Then find the mean router-router path length.
You are working on a router that has established privilege levels that restrict access to certain functions. You discover that you are not able to execute the command show running-configuration. How can you view and confirm the access lists that have been applied to the Ethernet 0 interface on your router?
Consider a computer network using the distance vector routing algorithm in its network layer. The partial topology of the network is as shown below. The objective is to find the shortest-cost path from the router R to routers P and Q. Assume that R does not initially know the shortest routes to P and Q. Assume that R has three neighbouring routers denoted as X, Y, and Z. During one iteration, R measures its distance to its neighbours X, Y, and Z as 3, 2, and 5, respectively. Router R gets routing vectors from its neighbours that indicate that the distance to router P from routers X, Y, and Z are 7, 6, and 5, respectively. The routing vector also indicates that the distance to router Q from routers X, Y, and Z are 4, 6, and 8, respectively. Which of the following statement(s) is/are correct with respect to the new routing table of R, after updation during this iteration ? 
Read the passage carefully and select the best answer to each question out of the given four alternatives. One should consciously engage in activities that will nourish your soul. Just as we nourish the body, we need to nurture the soul to connect to the creative power ofthe universe and to manifest joy in our lives. Often, we forget to address the soul, lost as we are in a jungle of material and sensual pleasures. But the more youembrace what feeds your soul, the happier you become. So if you want to enjoy the abundance of life, engage in what enriches your soul. Nurturing the soul is allabout finding calm amidst chaos. There are a number of practices that empower people towards this end including silent contemplation, various forms of meditation,yoga and tai chi However, the rigor and discipline involved in the pursuit of such practices often seems to discourage people. Add to this, the temptations of thematerial world that leave little time and motivation for anyone to pursue the spiritual path. Poet Walt Whitman declared: “Whatever satisfies the soul is truth”. Thegood news is that simple, everyday activities can also nutrify the soul — like spending time in the midst of nature, dancing in the rain or just putting thoughts onpaper. Do whatever is calming and pleases you. Creative pursuits are particularly appealing as inside each one of us, there is an artist craving for release andawaiting an opportunity for expression. One of the ways to indulge the artist within is to get started with the practice of any one or more of the creative art formssuch as music, singing, dancing, acting, drawing, painting, sculpting, poetry, fiction or essay writing. When you engage in such soul nourishing activities, all thought and energy gets focused toward goal accomplishment. At this point, you will find that even unknownforces of the universe are conniving to assist you in your amateurish but sincere attempts. As you progress, you are motivated to do better. You touch and access afaculty, a part of you that you never knew existed. Your inner artist is unleashed, baring the beauty of your soul that has found a fond medium of expression. Forinstance, a sculptors soul is seen in his artwork; a musicians in his compositions; an actors in his acting, a painters in his paintings and so on. It is immaterialwhether your effort is an immaculate artwork or just a clumsy attempt by a layperson. The idea is to try, be inspired and to create giving free rein to the mind. AsMichelangelo remarked: “I saw the angel in the marble and carved until I set him free”! What can you infer from Michelangelos statement - "I saw the angel in the marble and carved until I set him free"?