Bissoy.com
Doctors Medicines MCQs Q&A

If there are n signal sources of same data rate, then the TDM link has _______ slots.

If there are n signal sources of same data rate, then the TDM link has _______ slots. Correct Answer n

In TDM, the total unit of time is divided equally among all the signal sources and each and every source has access to the complete channel bandwidth during its allotted time slot. When the time slot of the source is not active, it remains idle and waits for its slot to begin.

Related Questions

A TDM link has 20 signal channels and each channel is sampled 8000 times/sec. Each sample is represented by seven binary bits and contains an additional bit for synchronization. The total bit rate for the TDM link is
Consider the following solution to the producer-consumer synchronization problem. The shared buffer size is ?. Three semaphores empty, full and mutex are defined with respective initial values of 0, ? and 1. Semaphore empty denotes the number of available slots in the buffer, for the consumer to read from. Semaphore denotes the number of available slots in the buffer, for the producer to write to. The placeholder variables, denoted by P, Q, R, and S, in the code below can be assigned either empty or full. The valid semaphore operations are: wait ( ) and signal ( ). Producer: Consumer: do {         wait (P) ;         wait (mutex) ;         //Add item to buffer         signal (mutex) ;         signal (Q) ; } while (1) ; do {          wait (R) ;          wait (mutex) ;          //Consume item from buffer          signal (mutex) ;          signal (S) ; } while (1) ;   Which one of the following assignments to P, Q, R and S will yield the correct solution?
Which of the following statements are true?
Statement I Big data refers to no precise quantity, but generally refers to data in the range of Petabytes and Exabyte, i.e. billions to trillions of records, all from various sources. Big data is generated much faster. than traditional data in much larger quantities.
Statement II Big data interests industries because they are able to learn more patterns and curious variances than smaller data sets, with the capability to provide valuable insights into consumer behaviour, weather systems, financial market activity, or other phenomena.
Statement III Various departments and product lines use various applications within most organisations and store data in separate datasets. These separate databases may contain similar data, but data from one data base to another is not always consistent. This is called data silo.
Consider the following statements regarding Time-Division Multiplexing (TDM): 1. The information from different measuring points is transmitted serially on the same communication channel. 2. It involves the transmission of data samples rather than continuous data transmission. 3. It is especially useful when telemetering fast-changing, high bandwidth data. Which of the above statements are valid in respect to TDM?
Directions : In each of the following questions a statement is given, followed by two conclusions. Give answer :

Statement : The General Administration Department has issued a circular to all the employees informing them that henceforth the employees can avail their lunch break at any of the half-hour slots between 1.00 p.m. and 2.30 p.m.

Assumptions :
I. The employees may welcome the decision and avail lunch break at different time's slots.
II. There may not be any break in the work of the organization as the employees will have their lunch break at different time slots.
Four messages band limited to W, W, 2W and 3W respectively are to be multiplexed using Time Division Multiplexing (TDM). The minimum bandwidth required for transmission of this TDM signal is
In TDM, the transmission rate of a multiplexed path is always _______ the sum of the transmission rates of the signal sources.
A 4-bar mechanism with all revolute pairs has link lengths lf = 20 mm, lin = 40 mm, lco = 50 mm and lout = 60 mm. The suffixes 'f', 'in', 'co' and 'out' denote the fixed link, the input link, the coupler and output link respectively. Which one of the following statements is true about the input and output links?
The magnitude of absolute angular velocity of link 2 is 10 rad/s while that of link 3 is 6 rad/s, what is the angular velocity of link 3 relative to link 2?
Consider the following three statements about link state and distance vector routing protocols, for a large network with 500 network nodes and 4000 links. [S1] The computational overhead in link state protocols is higher than in distance vector protocols. [S2] A distance vector protocol (with split horizon) avoids persistent routing loops, but not a link state protocol. [S3] After a topology change, a link state protocol will converge faster than a distance vector protocol. Which one of the following is correct about S1, S2, and S3?