Spring Batch excels in the robustness it surfaces as simple configuration options for the edge and failure cases.

The admission ticket for an exhibition bears a password which is changed after every clock hour based on set of words chosen for each day. The following is an illustration of the code and steps of rearrangement for subsequent clock hours. The time is 9 a.m. to 3 p.m. Day's first password : First Batch ----- 9 a.m. to 10 a.m. is not ready cloth simple harmony burning Second Batch ----- 10 a.m. to 11 a.m. ready not is cloth burning harmony simple Third Batch ----- 11 a.m. to 12 noon cloth is not ready simple harmony burning Fourth Batch ----- 12 noon to 1 p.m. not is cloth ready burning harmony simple Fifth Batch ----- 1 p.m. to 2 p.m. ready cloth is not simple harmony burning and so on. If the password for 11 a.m. to 12 noon was --- "soap shy miss pen yet the she", what was the password for the first batch ?

A

pen miss shy soap she the yet

B

shy miss pen soap yet the she

C

soap pen miss shy she the yet

D

miss shy soap pen she the yet

When a closely-coiled helical spring of mean diameter (D) is subjected to an axial load (W), the deflection of the spring ($$\delta $$) is given by (where d = Diameter of spring wire, n = No. of turns of the spring and C = Modulus of rigidity for the spring material)

A

$$\frac{{{\text{W}}{{\text{D}}^3}{\text{n}}}}{{{\text{C}}{{\text{d}}^4}}}$$

B

$$\frac{{2{\text{W}}{{\text{D}}^3}{\text{n}}}}{{{\text{C}}{{\text{d}}^4}}}$$

C

$$\frac{{4{\text{W}}{{\text{D}}^3}{\text{n}}}}{{{\text{C}}{{\text{d}}^4}}}$$

D

$$\frac{{8{\text{W}}{{\text{D}}^3}{\text{n}}}}{{{\text{C}}{{\text{d}}^4}}}$$

A closely coiled helical spring is acted upon by an axial force. The maximum shear stress developed in the spring is $$\tau $$. The half of the length of the spring if cut off and the remaining spring is acted upon by the same axial force. The maximum shear stress in the spring in new condition will be

A

$$\frac{\tau }{2}$$

B

$$\tau $$

C

$$2\tau $$

D

$$4\tau $$

An open coiled helical compression spring 'A' of mean diameter 50 mm is subjected to an axial load ‘W’. Another spring 'B' of mean diameter 25 mm is similar to spring 'A' in all respects. The deflection of spring 'B' will be __________ as compared to spring 'A'.

A

One-eighth

B

One-fourth

C

One-half

D

Double

To meet a government requirement, a bottler must test 5 percent of its spring water and 10 percent of its sparkling water for purity. If a customer ordered 120 cases of spring water and 80 cases of sparkling water, then what percent of all the cases must the bottler test before he can send it out ?

A

6.5%

B

7.0%

C

7.5%

D

8.0%

Which of the following statements are true about edge dislocations?
P. Edge dislocations do not have an extra half plane associated with them.
Q. The Burger vectors is perpendicular to the direction.
R. Edge dislocations can avoid obstacles by cross-slip.
S. Depending on geometry, parallel edge dislocations of opposite signs can attract or repel one another.

A

R

B

P, Q, S

C

Q, S

D

Q, R

You’ll split your OSGi–specific Spring configuration and your plain-vanilla Spring configuration into:-

A

modulename-context.xml

B

modulename-osgi-context.xml

C

all of the mentioned

D

none of the mentioned

Mean diameter of conical spring is 100 mm, height of spring is 50 mm, angle between the base and slanting side of the cone is 45 degrees and diameter of the wire is 5 mm. What is the inner diameter at top edge of spring?

A

10

B

5

C

20

D

15

Two closely-coiled helical springs 'A' and 'B' of the same material, same number of turns and made from same wire are subjected to an axial load W. The mean diameter of spring 'A' is double the mean diameter of spring 'B'. The ratio of deflections in spring 'B' to spring 'A' will be

A

$$\frac{1}{8}$$

B

$$\frac{1}{4}$$

C

2

D

4

Two closely coiled helical springs 'A' and 'B' are equal in all respects but the number of turns of spring 'A' is half that of spring 'B'. The ratio of deflections in spring 'A' to spring 'B' is

A

$$\frac{1}{8}$$

B

$$\frac{1}{4}$$

C

$$\frac{1}{2}$$

D

2

Spring Batch excels in the robustness it surfaces as simple configuration options for the edge and failure cases.

Related Questions