Related Questions

(i) Why do we remember May Day? (ii) What significant changes happened due to that event? (iii) How did the event happen? (iv) What can be done in present day as a result of that event ? (v) Mention the moral of that event.
A (i) We remember May day as it reminds us about the historic struggle of working people throughout the world
B (II) All the fortunate workers enjoy today-a minimum wage, safety laws and 8 hour workday due to that event.
C (iii) Police fired into a crowd of strikers at the McCormick arvest Machine Company, Chicago, killing at least one striker, seriously wounding five or six others and injuring an undetermined number.
D (iv) The events of May day 1886 is a remind that workers will continue to be subjugated until they stand up and speak out to gain better working conditions, better pay and better lives.
E (V) Workers will not be ever down in term of their right. (All)
When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)
A Is at the maximum distance from CG of the rivet group
B Is at the minimum distance from CG of the rivet group
C Gives the maximum angle between the two forces Fa and Fm
D Gives the minimum angle between the two forces Fa and Fm
In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed
A 10 mm
B 15 mm
C 20 mm
D 25 mm
Which is the object on which the event occured or with which the event is associated?
A event type
B event target
C both event type and even target
D none of the mentioned
Insurance refers to protection against an event that _________ happen whereas Assurance refers to protection against an event that _________ happen.
A May, may not
B Might, will
C Must, need not
D Will, will not
The load factors for live load and dead load are taken respectively as
A 1.5 and 2.2
B 2.2 and 1.5
C 1.5 and 1.5
D 2.2 and 2.2
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$
Which is the opposite to the load event in JavaScript?
A dontload
B postload
C preload
D unload
In an ac circuit, power to the load peaks at the frequency at which the load impedance is the complex conjugate of the output impedance.
A True
B False
D.C. motor is to a drive a load which is almost nil for certain part of the load cycle and peak value for short duration. We will select this
A Series motor
B Shunt motor
C Compound motor
D Any of the above

Next steps