Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider three software items: Program-X, Control Flow Diagram of Program-Y and Control Flow Diagram of Program-Z as shown below Program-X: Control Flow Diagram of Program-Y sumcal (int maxint, int value) {       int result=0, i=0;       if (value <0)       {           Value = -value;       }       while ( (i
Consider a machine with a byte addressable main memory of 220 bytes, block size of 16 bytes and a direct mapped cache having 212 cache lines. Let the addresses of two consecutive bytes in main memory be (E201F)16 and (E2020)16. What are the tag and cache line address (in hex) for main memory address (E201F)16?
With regard to computer memory, which of the following statement(s) is/are TRUE?  (A) Cache memory is 'volatile' memory. (B) Magnetic memory is 'volatile' memory.  (C) Flash memory is 'volatile' memory. (D) RAM is 'volatile' memory. Choose the correct answer from the option given below:
On a non-pipelined sequential processor, a program segment, which is a part of the interrupt service routine, is given to transfer 500 bytes from an I/O device to memory.     Initialize the address register     Initialize the count to 500 LOOP: Load a byte from device     Store in memory at address given by address register     Increment the address register     Decrement the count     If count! = 0 go to LOOP Assume that each statement in this program is equivalent to a machine instruction which takes one clock cycle to execute if it is a non-load/store instruction. The load-store instructions take two clock cycles to execute. The designer of the system also has an alternate approach of using the DMA controller to implement the same transfer. The DMA controller requires 20 clock cycles for initialization and other overheads. Each DMA transfer cycle takes two clock cycles to transfer one byte of data from the device to the memory. What is the approximate speedup when the DMA controller based design is used in place of the interrupt driven program based input-output?
The order of a leaf node in a B+ tree is the maximum number of (value, data record pointer) pairs it can hold. Given that the block size is 1K bytes, data record pointer is 7 bytes long, the value field is 9 bytes long and a block pointer is 6 bytes long, what is the order of the leaf node?
A float occupies 4 bytes. If the hexadecimal equivalent of these 4 bytes are A, B, C and D, then when this float is stored in memory in which of the following order do these bytes gets stored?
Consider the following example – Size of Plaintext – 48 bytes. Size of MAC – 20 bytes. Block Length – 8 bytes. How many bytes of padding need to be added to the system?
Each of the question below consists of a question and three statements number I, II and III given below it. You have to decide whether the data provided in the statement are sufficient to answer the question. Two person X and Y together can make 25% of total number of bricks in 4.8 days. Another person Z can make 50 bricks in a day. What is the time taken by person X and Z together to make the total number of bricks? I. Dimensions of a brick is (3cm × 4cm × 5cm) while the dimension of a cuboids when all the bricks are put together is (72cm × 80cm × 50cm) and ratio of number of days taken by X and Y alone to make the total number of bricks is 3 : 2. II. The total number of bricks is 4800 and person Y can make 150 bricks in day. III. Total volume of all the bricks together is 1.008m3 and dimension of a bricks is (5cm × 6cm × 7cm) and time taken by Z to make total number of bricks is 200 % more than the total time taken by person Y to make total number of bricks.
At an Electronic Data processing unit, five out of the eight program sets P,Q,R,S,T,U,V and W are to be operated daily. On any one day, except for the first day of a month, only three of the program sets must be the ones that were operated on the previous day. The program operating must also satisfy the following conditions: 1. If program P is to be operated on a day, V can’t be operated on that day. 2. If Q is to be operated on a day, T must be one of the programs to be operated after Q. 3. If R is to be operated on a day, V must be one of the programs to be operated after R. 4. The last program to be operated on any day must be either S or U. If the program sets R and W are to be operated on the first day, which of the following could be the other program on that day?
Quantity I: In a party, 75% of the total number of female is equal to 50% of the total number of male then the number of female is what percentage of the total number of person in the party?  Quantity II: In a school, 66.66% of the total number of girls is equal to 40% of the total number of boys then the total number of girls is what percentage of the total number of students of the school?