Bissoy.com
Doctors Medicines MCQs Q&A

The MOSFET circuit below has Vt = 1V, knW/L = 0.8 mA/V2 and VA = 40V. If terminal X is grounded and terminal Z is connected to a current source delivering a current of 10 µA and having a resistance of 100 kΩ, find the voltage signal that can be measured at Y neglecting the effect of V0.

The MOSFET circuit below has Vt = 1V, knW/L = 0.8 mA/V2 and VA = 40V. If terminal X is grounded and terminal Z is connected to a current source delivering a current of 10 µA and having a resistance of 100 kΩ, find the voltage signal that can be measured at Y neglecting the effect of V0. Correct Answer 0.34V

n:

Related Questions

The MOSFET circuit below has Vt = 1V, knW/L = 0.8 mA/V2 and VA = 40V. If terminal Z is grounded, X is connected to a signal source having a resistance of 1 MΩ and terminal Y is connected to a load resistance of 40 kΩ, find the voltage gain from the signal source to the load.
The Transfer characteristic of the different types of MOSFETs is shown below, where ID is drain current and VGS is the Gate-Source voltage, the correct combination of MOSFET w.r.t to transfer characteristics is: Types of MOSFET (P) P – Channel Enhancement MOSFET (Q) P – Channel Depletion MOSFET (R) N – Channel Enhancement MOSFET (S) N – Channel Depletion MOSFET
The MOSFET circuit below has Vt = 1V, knW/L = 0.8 mA/V2 and VA = 40V. If terminal Y is grounded find the voltage gain from X to Z with Z open-circuit.
Consider the following statement: a) When resistance is connected to the AC source, the current leads the voltage. b) When resistance is connected to the AC source, the current lags behind the voltage. c) When resistance is connected to the AC source, the current and the voltage are in the same phase. Which of the following statement is correct?
An amplifier is measured to have an internal resistance of 10 kΩ, voltage gain of 100V/V and output resistance of 100 Ω. Also, when a load resistance of 1 kΩ is connected between the output resistance if found to decrease to 8 kΩ. If the amplifier is fed with the signal source having an internal resistance of 2 kΩ. Find Gm.
An amplifier is measured to have an internal resistance of 10 kΩ, voltage gain of 100V/V and output resistance of 100 Ω. Also, when a load resistance of 1 kΩ is connected between the output resistance if found to decrease to 8 kΩ. If the amplifier is fed with the signal source having an internal resistance of 2 kΩ. Find Av.
An amplifier is measured to have an internal resistance of 10 kΩ, voltage gain of 100V/V and output resistance of 100 Ω. Also, when a load resistance of 1 kΩ is connected between the output resistance if found to decrease to 8 kΩ. If the amplifier is fed with the signal source having an internal resistance of 2 kΩ. Find Gvo.
An amplifier is measured to have an internal resistance of 10 kΩ, voltage gain of 100V/V and output resistance of 100 Ω. Also, when a load resistance of 1 kΩ is connected between the output resistance if found to decrease to 8 kΩ. If the amplifier is fed with the signal source having an internal resistance of 2 kΩ. Find Gv.
An amplifier is measured to have an internal resistance of 10 kΩ, voltage gain of 100V/V and output resistance of 100 Ω. Also, when a load resistance of 1 kΩ is connected between the output resistance if found to decrease to 8 kΩ. If the amplifier is fed with the signal source having an internal resistance of 2 kΩ. Find R out.
An amplifier is measured to have an internal resistance of 10 kΩ, voltage gain of 100V/V and output resistance of 100 Ω. Also, when a load resistance of 1 kΩ is connected between the output resistance if found to decrease to 8 kΩ. If the amplifier is fed with the signal source having an internal resistance of 2 kΩ. Find Ai.