Bissoy.com
Doctors Medicines MCQs Q&A

For operation with 10-V output pulses with the requirement that the sum of the rise and fall times represent only 20% of the pulse width (at half amplitude), what is the slew-rate requirement for an op amp to handle pulses 2 µs wide? (Note: The rise and fall times of a pulse signal are usually measured between the 10%- and 90%-height points.)

For operation with 10-V output pulses with the requirement that the sum of the rise and fall times represent only 20% of the pulse width (at half amplitude), what is the slew-rate requirement for an op amp to handle pulses 2 µs wide? (Note: The rise and fall times of a pulse signal are usually measured between the 10%- and 90%-height points.) Correct Answer 40 V/µs

Related Questions

Consider the 5 × 5 matrix \[{\text{A}} = \left[ {\begin{array}{*{20}{c}} 1&2&3&4&5 \\ 5&1&2&3&4 \\ 4&5&1&2&3 \\ 3&4&5&1&2 \\ 2&3&4&5&1 \end{array}} \right
Select from the alternatives that combination of numbers, which will form a meaningful word if given letters are arranged accordingly. \(\begin{matrix} \ \ \ \text{A} & \rm R & \rm W & \rm L & \rm E & \rm K \\\ \downarrow & \downarrow & \downarrow & \downarrow & \downarrow & \downarrow \\\ \ \ 1 & 2 & 3 & 4 & 5 & 6 \end{matrix}\)
Let A be an m × n matrix and Ban n × m matrix. It is given that determinant ($$I$$m + AB) = determinant ($$I$$n + BA), where $$I$$k is the k × k identity matrix. Using the above property, the determinant of the matrix given below is
\[\left[ {\begin{array}{*{20}{c}} 2&1&1&1 \\ 1&2&1&1 \\ 1&1&2&1 \\ 1&1&1&2 \end{array}} \right
Eigen values of the matrix \[\left[ {\begin{array}{*{20}{c}} 0&1&0&0 \\ 1&0&0&0 \\ 0&0&0&{ - 2i} \\ 0&0&{2i}&0 \end{array}} \right
A cam should be designed only using uniform rise and fall within the second half of cam profile, the first half is dwell period, without any dwell period in between the rise and fall periods and rise and fall periods should be same. The maximum rise in follower is 45 mm. How much the follower will rise when the follower is 120 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within the second half of cam profile, the first half is dwell period, without any dwell period in between the rise and fall periods and rise and fall periods should be same. The maximum rise in follower is 55 mm. How much the follower will rise when the follower is 240 degrees from its initial position of a cam?
In a coded language “ADETP” is coded as “$&$&&” and “DTPQUV” is coded as “&&&&$&”? What is the code word for “&&$$&$”?
A cam should be designed only using uniform rise and fall within half of the cam, the remaining is dwell period, and without any dwell period in between the rise -fall periods and rise and fall periods should be same. The maximum rise in follower is 30 mm. How much the follower will rise when the follower is 120 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within half of the cam, the remaining is dwell period, and without any dwell period in between the rise-fall periods and rise and fall periods should be same. The maximum rise in follower is 45 mm. How much the follower will rise when the follower is 45 degrees from its initial position of a cam?
A cam should be designed only using uniform rise and fall within first half of cam profile, the remaining is dwell period, and without any dwell period in between the rise-fall periods and rise and fall periods should be same. The maximum rise in follower is 35 mm. How much the follower will rise when the follower is 240 degrees from its initial position of a cam?