Bissoy.com
Doctors Medicines MCQs Q&A

A coil has a resistance of 4 ohms and an inductance of 2H. It is connected to a 20V dc supply. Calculate the final value of the voltage across the inductor.

A coil has a resistance of 4 ohms and an inductance of 2H. It is connected to a 20V dc supply. Calculate the final value of the voltage across the inductor. Correct Answer 0 V

At steady state, inductor behaves as a short circuit for dc current so, V=0

Related Questions

A coil has a resistance of 4 ohms and an inductance of 2H. It is connected to a 20V dc supply. Calculate the initial value of the voltage across the inductor.
A coil has a resistance of 4 ohms and an inductance of 2H. It is connected to a 20V dc supply. Calculate the final value of the current in the circuit.
A coil has a resistance of 4 ohms and an inductance of 2H. It is connected to a 20V dc supply. Calculate the value of voltage 1s after the switch is closed.
When an electric current coil of a wattmeter is connected to the electric current path R and the voltage coil is connected between the electric current R path and the neutral side of the balanced three phase supply, it shows 10 kW. The line voltage along the phase sequence RYB is 400 V. The current drawn by the current path is 54 A. What is the new reading of the wattmeter if the voltage coil is connected between the lines B and the Y paths, even if the electric current coil is continuously present in the line R?
A coil has a resistance of 4 ohms and an inductance of 2H. It is connected to a 20V dc supply. Calculate the initial value of the current in the circuit.
A coil has a resistance of 4 ohms and an inductance of 2H. It is connected to a 20V dc supply. Calculate the value of current 1s after the switch is closed.
You have a 2 milliampere meter movement with a coil resistance of 1000 ohms. When 2 milliampere is flowing through the meter coil and is causing FSD, what will be the voltage developed across the coil resistance?
A resistance of 7 ohm is connected in series with an inductance of 31.8mH. The circuit is connected to a 100V 50Hz sinusoidal supply. Calculate the voltage across the inductor.
Determine the source voltage if voltage across resistance is 70V and the voltage across inductor is 20V as shown in the figure.
A series resonant band-stop filter consists of a 68 Ω resistor, a 110 mH coil, and a 0.02 µF capacitor. The internal resistance, RW, of the coil is 4 Ω. Input voltage is 200 mV. Output voltage is taken across the coil and capacitor in series. What is the output voltage magnitude at f0?