Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Fourier's law of heat conduction is (where Q = Amount of heat flow through the body in unit time, A = Surface area of heat flow, taken at right angles to the direction of heat flow, dT = Temperature difference on the two faces of the body, dx = Thickness of the body, through which the heat flows, taken along the direction of heat flow, and k = Thermal conductivity of the body)
Fourier's law of heat conduction is (where Q = Amount of heat flow through the body in unit time, A = Surface area of heat flow, taken at right angles to the direction of heat flow, dT = Temperature difference on the two faces of the body, dx = Thickness of the body, through which the heat flows, taken along the direction of heat flow and k = Thermal conductivity of the body)
Two refrigerators M and N operate in series. The refrigerator M absorbs energy at the rate of 1 kW from a body at temperature 400 K and rejects energy as heat to a body at a temperature T. The refrigerator N absorbs the same quantity of energy which is rejected by the refrigerator N from the body at temperature T, and rejects energy as heat to a body at temperature 800 K. If both the refrigerators have the same C.O.P., what is the value temperature T?
The pie chart given below shows the amount spent by a boy on the purchase of six different items. The total amount spent on all these six items is Rs. 54000. The amount spent on a specific item is represented as a degree with reference to the total amount spent on all these six items. Which of the following statement(s) is/are correct? I. The amount spent on article A is Rs.900 less than the amount spent on article B. II. The amount spent on article C is Rs 2400 more than the amount spent on article D. III. The ratio of the amount spent on article B to the amount spent on article E is 4 : 1.
The specific heat of the substance is defined as the amount of heat required to raise a unit mass of the substance through a unit rise in temperature.
For a standard system with temperatures T1 and T2, where T1 < Ta < T2 (Ta – Atmospheric Temperature). Q1 is the heat extracted from a body at temperature T1, and Q2 is heat delivered to the body at temperature T2. What is the C.O.P. of the heat pump for given conditions?
A body A of mass 0.5kg and specific heat 0.85 is at a temperature of 60°C. Another body B of mass 0.3kg and specific heat 0.9 is at a temperature of 90°C. When they are connected to a conducting rod, heat will flow from ___________
To effect a bond between two metal plates, 2.5 cm and 15 cm thick, heat is uniformly applied through the thinner plate by a radiant heat source. The bonding must be held at 320 K for a short time. When the heat source is adjusted to have a steady value of 43.5 k W/m2, a thermocouple installed on the side of the thinner plate next to source indicates a temperature of 345 K. Calculate the temperature gradient for heat conduction through thinner plate. In the diagram, the upper plate is 2.5 cm thick while the lower is 15 cm thick.
The amount of heat required to raise the temperature of __________ water through one degree is called kilojoules.
The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called