Bissoy.com
Doctors Medicines MCQs Q&A

Effect of feedback on sensitivity is minimum in:

Effect of feedback on sensitivity is minimum in: Correct Answer Closed loop control system

Sensitivity is defined as the change in output with respect to change in parameter or input and for a good control system the sensitivity must be less and in closed loop control system it gets reduced by the factor of 1/(1+GH).

Related Questions

Consider the following statements with respect to the feedback from the control systems: 1. The feedback can improve stability or be harmful to stability if it is not properly applied. 2. The feedback can always improve stability. 3. In many situations, the feedback can reduce the effect of noise and disturbance on system performance. 4. In general, the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located. Select the correct statements.
Consider the following statements with respect to the feedback of the control systems. i. Feedback can improve stability or be harmful to stability if it is not properly applied. ii. Feedback can always improve stability iii. In many situations the feedback can reduce the effect of noise and disturbance on system performance. iv. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Consider the following statements with respect to the feedback of the control systems: 1. Feedback can improve stability or be harmful to stability if it is not properly applied. 2. Feedback can always improve stability 3. In many situations the feedback can reduce the effect of noise and disturbance on system performance. 4. In general the sensitivity of the system gain of a feedback system of a parameter variation depends on where the parameter is located.
Consider a measuring system consisting of a sensor, an amplifier and an oscilloscope. The sensitivity of each equipment is as follows : Sensor sensitivity : 0.4 mV/°C, Amplifier gain : 5.0 V/mV, and Oscilloscope sensitivity : 10 mV/V. What is the sensitivity of complete measurement system ?
Which of the following statements are true/false?
1. A minimum rate of wages for the time spent by employees for the production of output is minimum time rate.
2. Minimum piece rate is the rate based on the quantity of the output employees have produced.
3. The guaranteed time rate is a minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis.
4. A minimum rate of remuneration to apply in the case of employees employed on piece work for the purpose of securing to such employees a minimum rate of wages on a time work basis is overtime rate.
Consider the circuit shown below. Consider A: Current-shunt feedback B: Current-series feedback C: Voltage-shunt feedback D: Voltage-series feedback Which of the above are present?
The below table provides the thermos-emf sensitivity of five materials with reference to platinum around 273 K. Material Constantan Nickel Copper Iron Nichrome Sensitivity (μVK-1) -35 -25 +6 +18.5 +25 Which one of the following thermocouple pairs has maximum sensitivity around 273 K?
In order to increase sensitivity of U-tube manometer, one leg is usually inclined by angle 'θ'. Sensitivity of inclined tube to sensitivity of U-tube is equal to
In order to increase sensitivity of U-tube manometer, one leg is usually inclined by angle $$\theta $$. Sensitivity of inclined tube to sensitivity of U-tube is equal to
Statement 1: Seasonal and regional variations have little effect on the sensitivity of a product to damage due to temperature elevation or variation. Statement 2: Faulty processing/ packaging has a major effect in increasing the sensitivity of a product to damage.