Related Questions

Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.
A Center line
B Hatch line
C Poly line
D Dimension line
In normal view, how can you quickly change to handout master view?
A Click the outline tab and select handout master view
B Press the shift key and click the handout master view button
C On the view menu, click slide sorter, and click handouts
D All of above
The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.
A Width
B Height
C Length
D None of the above
A partial auxiliary view is used to show only the __________ in the auxiliary view.
A Projected inclined plane
B The projected top view
C The projected side view
D None of the above
The lines used to create the auxiliary view should appear as ________ in the finished view.
A Object lines
B Construction lines
C Reference lines
D Construction lines
In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________.
A Leave the view as is
B Eliminate the view
C Use the left view instead
D None of the above
An advantage of this type of view is that each view shows the object all the way through as if it were transparent:
A Planar
B Horizontal
C Auxiliary
D Orthographic
Each of the following idioms is followed by some alternative meaning. choose the one which best expresses its meaning : Birds eye view
A To view something closely
B To view suspiciously
C To view in general from above
D To look from a different angle
Choose the exact meaning of the idioms/phrases. Bird's eye view
A to view something closely
B general view from above
C to view suspiciously
D to look from a different angle
The correct meaning of 'a bird's eye view' is-
A false hope
B a cusory glance
C eye witness
D a false story

Next steps