Bissoy.com
Doctors Medicines MCQs Q&A

A transformer with output of 250kVA at 3000 V has 600 turns on its primary and 60 turns on secondary winding. What will be the voltage on the secondary side.

A transformer with output of 250kVA at 3000 V has 600 turns on its primary and 60 turns on secondary winding. What will be the voltage on the secondary side. Correct Answer 300 V

Given that N1 = 600, N2 = 60, E1 = 3000

Given voltage itself is primary winding voltage = 3000 V

Secondary winding voltage will be 300 V.

Related Questions

A 3 phase transformer has its primary connected in delta and secondary in star. Secondary to primary turns ratio per phase is 5. What would be the secondary voltage for a primary voltage of 400 V?
An ideal transformer is having 150 turns primary and 750 turns secondary. The primary coil is connected to a 240 V, 50 Hz source. The secondary winding supplies a load of 4 A at lagging power factor of 0.8. What is the power supplied by the transformer to the load?
A 25 KVA transformer is constructed to a turns ratio of N1/N2 = 10. The impedance of primary winding is 3+j5 ohms and of secondary winding is 0.5+j0.8 ohms. What will be the impedance of transformer when referred to primary?
Consider the following given statements about auto-transformers and choose the one which is/are correct. 1. Auto-transformers require less copper as compared to a conventional,2 winding transformer of the same capacity. 2. Auto-transformers provide isolation between the primary and secondary windings. 3. Auto- transformer has less leakage reactance as compared to the conventional, 2 winding transformer of the same capacity.
Distributed winding is a type of winding in electrical machines where all the winding turns are arranged in a number of full pitches or fractional pitches. These coils are then placed in phase form or the commutator winding in slots spread around the periphery of the air gap. This type of winding used in
A 100 VA, 120/12 V transformer is to be connected so as to form a step-up transformer. A Primary voltage of 120 V is applied to the transformer. What is the secondary voltage of the transformer?
A certain power transformer has a turns ratio of 5. What voltage can you expect at the secondary winding when you apply 120 V to the primary winding?
A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance referred to the low voltage side in ohms is __________
A three phase transformer has a name plate details of 30 MVA and voltage rating of 230Y kV/69∆ kV with a leakage reactance of 10% and the transformer connection via wye-delta. Taking a base of 230 kV on the high voltage side, the transformer reactance referred to the low voltage side in ohms is
What is the turns ratio of a power transformer that shows 50 V at its secondary winding when you apply 150 V to its primary winding?