An ideal inductor (no internal resistance for the coil) or 20 mH is connected in series with an AC ammeter to an AC source whose emf is given by `e=20

Question

An ideal inductor (no internal resistance for the coil) or 20 mH is connected in series with an AC ammeter to an AC source whose emf is given by `e=20

An ideal inductor (no internal resistance for the coil) or 20 mH is connected in series with an AC ammeter to an AC source whose emf is given by `e=20sqrt(2)sin (200t+pi//3)V`, where t is in seconds. Find the reading of the ammeter ?

Monjur Alahi

5 views

2025-01-04 04:42

1 Answers

Related Questions

A secondary cell have source emf of 3 V. When this cell is connected to a load of 0.25 then load emf calculated is 2.10 V. The internal resistance of

2 Answers 4 Views

A 10 m long wire ofresistance `20 Omega` is connected in series with battery of EMF `3V` and negligible internal resistance and a resistance of `10 Om

2 Answers 4 Views

36 A student connects 10 dry cells each of emf \( E \) and internal resistance \( r \) in series, but by mistake the one cell gets wrongly connected. Then net emf and net internal resistance of the combination will be \( \begin{array}{ll}\text { a } & 8 E , 8 r \\ \text { b } & 10 E , 10 r \\ \text { c } & 8 E , 10 r \\ \text { d } & 8 E , r / 10\end{array} \)

2 Answers 53 Views

To decrease the range of an ammeter its resistance need to be incrased an ammeter has resistacne `R_(0)` and range / which of the following resistance

2 Answers 4 Views

What resistance should be connected in series with a 0.5 A ammeter to convert it into a 15 V voltmeter ? Given that the resistance of ammeter.

2 Answers 11 Views

A moving coil galvanometer is converted into an ammeter reads upto `0.03 A` by connecting a shunt of resistance `4r` across it and ammeter reads up `0

2 Answers 4 Views

An inductor coil, a capacitor and an a.c. source of rms voltage 24 V are connected in series. When the frequency of the source is varied, a maximum rm

2 Answers 4 Views

An alternating emf of peak value 350 V is applied across an a.c. ammeter of resistance `100 Omega`. What is the reading of the ammeter?

2 Answers 5 Views

If n cells each of emf E and internal resistance rare connected in parallel, then the total emf and internal resistances will be

2 Answers 4 Views

In the series combination of n cells each cell having emf `epsilon` and internal resistance r. If three cells are wrongly connected, then total emf an

2 Answers 5 Views

Salim Ahmed Kawsar · Accepted Answer · 2023-02-05T15:29:48+06:00

Salim Ahmed Kawsar

Given that `L = 20 mH = 20 xx 10^(-3)H`
`e=20sqrt(2)sin(200t+(pi)/(3))V`
`e=E_(0)sin(omega t+phi)`
`therefore E_(0)=20 sqrt(2), omega = 200`
`E_("rms")=(E_(0))/(sqrt(2))=(20sqrt(2))=(20sqrt(2))/(sqrt(2))=20V`
`i_("rms")=(E_("rms"))/(X_(L))=(E_("rms"))/(omega L)`
`= (20)/(200xx20xx10^(-3))=(10)/(2)=5A`

5 views Answered 2023-02-05 15:29