The testing pressure of storage tanks and pressure vessels designed as per Indian standard codes should be about __________ times.the design pressure.?

1.5 to 2
3 to 4
4 to 5
>5

LohaHridoy

4 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 1

4 views Answered 2022-09-01 13:21

Related Questions

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed?

1 Answers 5 Views

Assertion A : From consideration of structural soundness and economy of design, most codes control the maximum slenderness ratio of masonry walls and columns.Reason R : By controlling the maximum slenderness ratio, failure is by excessive stress and not by buckling. Select your answer according to codes given below:?

1 Answers 4 Views

The response curve for a step input signal from a reactor is called C-curve. The variance of C-curve in a 'tanks in series model' comprising of 'm' tanks is equal to?

1 Answers 6 Views

Mild steel storage vessels are suitable for the storage of?

1 Answers 4 Views

For storing hazardous chemicals in large storage tanks, the minimum safe distance between the two tanks should range between __________ times the tank diameter.?

1 Answers 4 Views

Cylindrical storage tanks used for the storage of volatile liquids (e.g., naphtha) have __________ roofs.?

1 Answers 4 Views

__________ shapedroof is the most commonly used roof for cylinderical storage tanks.?

1 Answers 4 Views

In hydrostatic testing of welded pipe (for leakage, strength etc.) the ratio of minimum hydrostatic test pressure to internal design pressure is around?

1 Answers 5 Views

Most of the storage vessels/tanks are made cylindrical, because of the fact that a cylinder?

1 Answers 6 Views

The given table shows the number of students and their class. Division A students are scholars who get a 25% rebate in fees. In addition, all girls students get 40% subsidy. If the fee per student a year WITHOUT rebate or subsidy is Rs. 10,000, then find the total fees collected from the students of these 6 classes for that year. Division /Standard Boys Girls Division A /Standard 9 20 40 Division B /Standard 9 40 35 Division C /Standard 10 20 20 Division A /Standard 10 40 20 Division B /Standard 10 20 40 Division C /Standard 10 20 15?

1 Answers 6 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)