Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory?

(wx/wy) = (ly/lx)
(wx/wy) = (ly/lx)²
(wx/wy) = (ly/lx)⁴
None of these

LohaHridoy

5 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 3

5 views Answered 2022-09-01 13:21

Related Questions

For a slab supported on its four edges with corners held down and loaded uniformly, the Marcus correction factor to the moments obtained by Grashoff Rankine’s theory?

1 Answers 20 Views

The slab is designed as one way if the ratio of long span to short span is?

1 Answers 4 Views

In counterfort type retaining wallsi) the vertical slab is designed as a continuous slabii) the heel slab is designed as a continuous slabiii) the vertical slab is designed as a cantileveriv) the heel slab is designed as a cantileverThe correct answer is?

1 Answers 6 Views

According to Rankine's theory, the failure occurs at a point in a member?

1 Answers 4 Views

If the ratio of long and short spans of a two way slab with corners held down is r, the actual reduction of B.M. is given by?

1 Answers 7 Views

An R.C.C. roof slab is designed as a two way slab if?

1 Answers 5 Views

According to load factor method, the permissible load ‘W’ on a short column reinforced with longitudinal bars and lateral stirrups, is?

1 Answers 5 Views

If l₁ and l₂ are the lengths of long and short spans of a two way slab simply supported on four edges and carrying a load w per unit area, the ratio of the loads split into w₁ and w₂ acting on strips parallel to l₂ and l₁ is?

1 Answers 9 Views

If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is?

1 Answers 5 Views

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed?

1 Answers 5 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)