During peak load periods, the best method of controlling compressors is?

Start-stop motor
Constant speed unloader
Relief valve
Variable speed

LohaHridoy

5 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 2

During peak load periods, the best method of controlling compressors is Constant speed unloader

5 views Answered 2022-09-01 13:21

Related Questions

The load factors for live load and dead load are taken respectively as?

1 Answers 6 Views

Assertion A : The load factor for live load is greater than that for dead load.Reason R : The live loads are more uncertain than dead loads.Select your answer based on the coding system given below :?

1 Answers 6 Views

The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is?

1 Answers 5 Views

During base load operation, the best method of controlling compressor is?

1 Answers 4 Views

In a pre-stressed beam carrying an external load W with a bent tendon is having angle of inclination and pre-stressed load P. The net downward load at the centre is?

1 Answers 5 Views

According to load factor method, the permissible load ‘W’ on a short column reinforced with longitudinal bars and lateral stirrups, is?

1 Answers 5 Views

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed?

1 Answers 5 Views

If interest is paid more than once in a year, ‘i’ is the rate of interest per year, ‘n’ is the number of periods in years and ‘m’ is a number of periods per years, compound amount factor (CAF) is:?

1 Answers 5 Views

Centrifugal compressors compared to reciprocating compressors?

1 Answers 4 Views

Method of maintaining fires in furnace during standby periods without undue consumption of fuel is called?

1 Answers 7 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)