The connecting rod bolts are tightened up with initial tension greater than the external load so that?

Joint may not open up
Bolts are weakest elements
The resultant load on the bolt would not be affected by the external cyclic load
Bolts will not loosen during service

LohaHridoy

6 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 3

6 views Answered 2022-09-01 13:21

Related Questions

The load factors for live load and dead load are taken respectively as?

1 Answers 6 Views

Assertion A : The load factor for live load is greater than that for dead load.Reason R : The live loads are more uncertain than dead loads.Select your answer based on the coding system given below :?

1 Answers 6 Views

In locomotives, the ratio of the connecting rod length to me crank radius is kept very large in order to?

1 Answers 4 Views

A connecting rod subjected to an axial load may buckle with?

1 Answers 5 Views

The connecting rod bolts are tightened up so that tightening stress?

1 Answers 5 Views

A rod is enclosed centrally in a tube and the assembly is tightened by rigid washers. If the assembly is subjected to a compressive load, then?

1 Answers 5 Views

The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is?

1 Answers 5 Views

In a pre-stressed beam carrying an external load W with a bent tendon is having angle of inclination and pre-stressed load P. The net downward load at the centre is?

1 Answers 5 Views

The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than?

1 Answers 5 Views

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed?

1 Answers 5 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)