With the same tool life, the maximum material per minute is removed by?

Increasing the cutting speed
Decreasing the cutting speed
Increasing the depth of cut
Increasing the feed rate

LohaHridoy

4 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 3

4 views Answered 2022-09-01 13:21

Related Questions

The Chairman of Rajya sabha can be removed from his office only if he is removed from :?

1 Answers 6 Views

For machining a mild steel workpiece using carbide tool, the maximum material will be removed at a temperature of?

1 Answers 13 Views

The velocity of tool along the tool face is known as?

1 Answers 6 Views

The correct sequence of the following parameters in order of their maximum to minimum influence on tool life is?

1 Answers 4 Views

The angle made by the face of the tool and the plane parallel to the base of cutting tool is called?

1 Answers 6 Views

If an insulating material is operated beyond the maximum allowable temperature, its life is?

1 Answers 5 Views

Two closely-coiled helical springs 'A' and 'B' of the same material, same number of turns and made from same wire are subjected to an axial load W. The mean diameter of spring 'A' is double the mean diameter of spring 'B'. The ratio of deflections in spring 'B' to spring 'A' will be?

1 Answers 5 Views

The ________ tool on the Dimension tool bar will place several dimensions at one time by using a selection box placed over several part features.?

1 Answers 5 Views

The ________ tool on the Dimension tool bar places the length of an arch on a drawing.?

1 Answers 4 Views

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed?

1 Answers 5 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)