Microwave Communication MCQ
Test your knowledge with important Microwave Communication MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30+ more Microwave Communication MCQs on Bissoy. Bissoy App
-
A reflex klystron is oscillating at the frequency of its resonant cavity. If the reflector voltage is made slightly less negative, the
-
In a radar-set receiver, the usual mixer stage is
-
The Gunn diode oscillator
-
What is the purpose of the electromagnetic field which surrounds a traveling-wave tube?
-
At what position is the input signal inserted into a traveling-wave tube?
-
What ferrite device can be used instead of duplexer of isolate microwave transmitter and receiver when both are connected to the same antenna?
-
The cavity resonator
-
In microwave transmission using digital radio, what causes most intersymbol interference?
-
The resonant frequency of a cavity resonator depends upon
-
The highest frequency which a conventional vacuum tube oscillator can generate is not limited by the
-
To achieve good bearing resolution when using a pulsed-radar set, an important requirement is
-
In an SHF pulsed radar set, a reflex klystron can be used as a
-
Calculate the effective earth’s radius if the surface refractivity is 301.
-
A traveling-wave tube (TWT) amplifies by virtue of
-
A thin layer of dirt and grime coverts the reflecting surface of the parabolic dish of a radar set. The particular effect on the performance of the radar will be
-
A Class-S Emergency Position-Indicating Radio Beacon (E.P.I.R.B)
-
The maximum usable range of the usual radar set (on any particular range setting) is determined by
-
Which of the following operating frequencies is used for the modern loran navigational system?
-
The coarse frequency adjustment of a reflex klystron is accomplished by
-
When used in conjunction with a radar set, the purpose of an echo box is to provide an artificial target.
-
The frequency of the oscillation generated by a magnetron, is mainly determined by
-
If the duration of the radar transmitted pulse, on a particular range of operation, is increased, the required bandwidth of the receiver’s IF amplifiers
-
A magnetron is operated at a duty cycle of 0.001. It has a peak power output of 100 kilo-watts. Its average power is
-
__________ is the progressive decrease of signal strength with increasing distance.
-
Which of the following is used as a high power microwave oscillator?
-
Which of the following is used as an oscillator device in the SHF band?
-
Microwave frequencies are normally regarded as those in the range of
-
In a pulsed radar set, the function of the duplexer is to
-
As the electron beam moves through a klystron’s intercavity drift space
-
The main frequency determining element of a klystron is