As the electron beam moves through a klystron’s intercavity drift space

A Frequency modulation at the input cavity creates velocity modulation at the output cavity
B Velocity modulation at the input cavity creates density modulation at the output cavity
C Density modulation at the input cavity creates velocity modulation at the output cavity
D Phase modulation at the input cavity creates velocity modulation at the output cavity.

Correct Answer: Velocity modulation at the input cavity creates density modulation at the output cavity

Bissoy MCQ
#Electronics And Communications Engineering #Microwave Communication

Related Questions

Read the following passage carefully and then choose the right word to complete the sentence that follows. Rockets are very expensive as it can be used only once. Appled scientists have therefore develped a reusable space craft called a space shuttle which takes off like a rocket; however, does no get destroyed as it returns to earth. It can also be used to lunch satellired into space, retrieve them from space if any repairing os required and allow around 8 scientists to crryout experiments in space. The space shuttle does not get.
A flattened
B enlarged
C ruined
D developed
The rectangular beam 'A' has length ‘l’, width ‘b’ and depth ‘d’. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be _________ as compared to beam ‘A’.
A Same
B Double
C Four times
D Six times
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
A One-fourth
B One-half
C Double
D Four times
The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
A Same
B One-half
C One-fourth
D One-eighth
The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be __________ as compared to beam A.
A Same
B Double
C Four times
D Six times
A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
A 0.207
B 0.307
C 0.407
D 0.508
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$
Oscillators of a klystron tube are maintained
A By bunches of electrons passing the cavity grids
B By plate-to-cathode feedback
C By feedback between the accelerating grid and the repeller
D By circulating bunches of electrons within the cavities.
Klystron oscillators are most often used in the frequency range of
A 300 to 3000 MHz
B 3000 to 30000 MHz
C 30 to 30000 MHz
D 10 to 10000 MHz
The main frequency determining element of a klystron is
A The repeller voltage
B The accelerating voltage
C Its resonant cavity
D Its mode of operation

Next steps