Digital Electronics MCQ
Test your knowledge with important Digital Electronics MCQ and their applications. These MCQs are beneficial for competitive exams too. Explore 30+ more Digital Electronics MCQs on Bissoy. Bissoy App
-
Storage of 1 KB means the following number of bytes
-
When an input signal 1 is applied to a NOT gate, the output is ___________.
-
Which of the following gate is a two-level logic gate
-
The only function of NOT gate is to ___________.
-
The number 10000 would appear just immediately after
-
Excess-3 code is known as
-
Consider the representation of six-bit numbers by two’s complement, one’s complement, or by sign and magnitude: In which representation is there overflow from the addition of the integers 011000 and 011000?
-
Digital computers are more widely used as compared to analog computers, because they are
-
The inputs of a NAND gate are connected together. The resulting circuit is ___________.
-
Which is the correct order of sequence for representing the input values in K-map?
-
NAND. gates are preferred over others because these
-
A NAND gate is called a universal logic element because
-
The binary code of (21.125)10 is
-
A hexadecimal odometer displays F 52 F. The next reading will be
-
In Boolean algebra, the bar sign (-) indicates ___________.
-
Among the logic families, the family which can be used at very high frequency greater than 100 MHz in a 4 bit synchronous counter is
-
The NAND gate is AND gate followed by ___________.
-
The NOR gate is OR gate followed by ___________.
-
Which type of CPLD packaging can provide maximum number of pins on the package due to small size of the pins?
-
An AND gate will function as OR if
-
Assuming 8 bits for data, 1 bit for parity, I start bit and 2 stop bits, the number of characters that 1200 BPS communication line can transmit is.
-
The binary number 10101 is equivalent to decimal number ___________.
-
What is/are the configurable functions of each and every IOBs connected around the FPGA device from the operational point of view?
-
Most of the digital computers do not have floating point hardware because
-
The inverter is ___________
-
A debouncing circuit is
-
"What would happen, if smaller logic modules are utilized for performing logical functions associated with FPGA?<br>A. Propagation delay will increase<br>B. FPGA area will increase<br>C. Wastage of logic modules will not be prevented<br>D. Number of interconnected paths in device will decrease<br>"
-
Pick out the CORRECT statement:
-
Digital circuit can be made by the repeated use of ___________
-
Positive logic in a logic circuit is one in which