Bissoy.com
Doctors Medicines MCQs Q&A

Indian Railways’ Chittaranjan Locomotive Works (CLW) rolled the first batch of aerodynamically designed WAP5 passenger electric locomotives which have the capacity to run at what speed?

Indian Railways’ Chittaranjan Locomotive Works (CLW) rolled the first batch of aerodynamically designed WAP5 passenger electric locomotives which have the capacity to run at what speed? Correct Answer 160 kmph

The correct answer is 160 kmph.

  • Indian Railways’ Chittaranjan Locomotive Works (CLW) rolled the first batch of aerodynamically designed WAP5 passenger electric locomotives which have the capacity to “run at 160 kmph”.
  • These locomotives are environment friendly and require less maintenance.
  • These locomotives can be utilized to haul Indian Railways’ premium express passenger trains.

Related Questions

Hitachi ABB Power Grids India will be delivering its transformers to Chittaranjan Locomotive Works (CLW) for the production of how many passenger and freight locomotive engines?
There is only one rail track between stations A and B on a railway line. One hour after the northbound superfast train N leaves station A for station B, the southbound passenger train S reaches station A from station B. The speed of superfast train is twice that of express train E, while the speed of passenger train S is half of that of train E. On some one day train N leaves from station A to station B 20 minutes late than its usual schedule. Both Train N and Train S have increased their speed to maintain the schedule as per the table. If the superfast train doubles its speed, then what should be the ratio (approximately) of the speed of the passenger train to the speed of the superfast train so that the passenger train reaches the station on that day at the exact scheduled time.
The following table presents the number of candidates trained by a training centre over 6 years (2001 to 2006). Year Batch 1 Batch 2 Batch 3 Batch 4 Batch 5 2001 75 144 114 102 108 2002 90 126 102 84 126 2003 96 114 75 105 135 2004 105 90 150 90 75 2005 90 75 135 75 90 2006 105 60 165 45 120 The number of candidates trained in Batch 2 in 2001 was what percentage more than the number of candidates trained in Batch 5 in 2005?
The admission ticket for an Art Gallery bears a password which is changed after every clock hour based on set of words Chosen for each day. The following is an illustration of the code and steps of rearrangement for subsequent clock hours. The Time is 9 a.m. to 3 p.m. Day’s first password: First Batch – 9 a.m. to 10 a.m. is not ready cloth simple harmony burning Second Batch – 10 a.m. to 11 a.m. ready not is cloth burning harmony simple Third Batch – 11 a.m. to 12 noon cloth is not ready simple harmony burning Fourth Batch – 12 noon to 1 p.m. not is cloth ready burning harmony simple Fifth Batch – 1 p.m. to 2 p.m. ready cloth is not simple harmony burning and so on. If the password for 11 a.m. to 12 noon was –“soap shy miss pen yet the she”, what was the password for the First Batch?
The admission ticket for an exhibition bears a password which is changed after every clock hour based on set of words chosen for each day. The following is an illustration of the code and steps of rearrangement for subsequent clock hours. The time is 9 a.m. to 3 p.m. Day's first password : First Batch ----- 9 a.m. to 10 a.m. is not ready cloth simple harmony burning Second Batch ----- 10 a.m. to 11 a.m. ready not is cloth burning harmony simple Third Batch ----- 11 a.m. to 12 noon cloth is not ready simple harmony burning Fourth Batch ----- 12 noon to 1 p.m. not is cloth ready burning harmony simple Fifth Batch ----- 1 p.m. to 2 p.m. ready cloth is not simple harmony burning and so on. If the password for 11 a.m. to 12 noon was --- "soap shy miss pen yet the she", what was the password for the first batch ?
In the question below there is a statement followed by two conclusions numbered I and II. You have to assume everything in the statement to be true, then consider the two conclusions together and decide which of them logically follows beyond a reasonable doubt from the information given in the statement: Statements: The Indian locomotive class WAG-12 is a class of 25 kV AC electric locomotives that was developed in 2017 by Alstom for the Indian Railways. Conclusions: I. The load capacity of WAG-12 is 6000 tons. II. WAG-12 uses an AC voltage system. 
Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it. The first working steam­ powered vehicle was designed and most likely built by Ferdinand Verbies, a Flemish member of a Jesuit mission in China around 1672. It was a 65 cm long scale­ model toy for the Chinese Emperor, that was unable to carry a driver or a passenger. It is not known if Verbiest's model was ever built. Nicolas- Joseph Cugnot is widely credited with building the first full­ scale, self ­propelled mechanical vehicle or automobile in about 1769; he also created a steam­ powered tricycle. He constructed two steam tractors for the French Army, one of which is preserved in the French National Conservatory of Arts and Crafts. His inventions were however handicapped by problems of water supply and maintaining steam pressure. In 1801, Richard Trevithick built and demonstrated his Puffing Devil road locomotive, believed by many to be the first demonstration of a steam ­powered road vehicle. It was unable to maintain sufficient steam pressure for long periods. Sentiment against steam ­powered road vehicles led to the Locomotive Acts of 1865. In 1807 Nicephore Niepce and his brother Claude probably created the world's first internal combustion engine which they called Pyreolophore. The first full­scale, working steam ­powered tricycle was built by:
Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it. The first working steam­ powered vehicle was designed and most likely built by Ferdinand Verbies, a Flemish member of a Jesuit mission in China around 1672. It was a 65 cm long scale­ model toy for the Chinese Emperor, that was unable to carry a driver or a passenger. It is not known if Verbiest's model was ever built. Nicolas- Joseph Cugnot is widely credited with building the first full­ scale, self ­propelled mechanical vehicle or automobile in about 1769; he also created a steam­ powered tricycle. He constructed two steam tractors for the French Army, one of which is preserved in the French National Conservatory of Arts and Crafts. His inventions were however handicapped by problems of water supply and maintaining steam pressure. In 1801, Richard Trevithick built and demonstrated his Puffing Devil road locomotive, believed by many to be the first demonstration of a steam ­powered road vehicle. It was unable to maintain sufficient steam pressure for long periods. Sentiment against steam ­powered road vehicles led to the Locomotive Acts of 1865. In 1807 Nicephore Niepce and his brother Claude probably created the world's first internal combustion engine which they called Pyreolophore. Cugnot built steam tractors for:
Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it. The first working steam­ powered vehicle was designed and most likely built by Ferdinand Verbies, a Flemish member of a Jesuit mission in China around 1672. It was a 65 cm long scale­ model toy for the Chinese Emperor, that was unable to carry a driver or a passenger. It is not known if Verbiest's model was ever built. Nicolas- Joseph Cugnot is widely credited with building the first full­ scale, self ­propelled mechanical vehicle or automobile in about 1769; he also created a steam­ powered tricycle. He constructed two steam tractors for the French Army, one of which is preserved in the French National Conservatory of Arts and Crafts. His inventions were however handicapped by problems of water supply and maintaining steam pressure. In 1801, Richard Trevithick built and demonstrated his Puffing Devil road locomotive, believed by many to be the first demonstration of a steam ­powered road vehicle. It was unable to maintain sufficient steam pressure for long periods. Sentiment against steam ­powered road vehicles led to the Locomotive Acts of 1865. In 1807 Nicephore Niepce and his brother Claude probably created the world's first internal combustion engine which they called Pyreolophore. The problem with Trevithick's Puffing Devil was:
Read the passage carefully and choose the best answer to each question out of the four alternatives and click the button corresponding to it. The first working steam­ powered vehicle was designed and most likely built by Ferdinand Verbies, a Flemish member of a Jesuit mission in China around 1672. It was a 65 cm long scale­ model toy for the Chinese Emperor, that was unable to carry a driver or a passenger. It is not known if Verbiest's model was ever built. Nicolas- Joseph Cugnot is widely credited with building the first full­ scale, self ­propelled mechanical vehicle or automobile in about 1769; he also created a steam­ powered tricycle. He constructed two steam tractors for the French Army, one of which is preserved in the French National Conservatory of Arts and Crafts. His inventions were however handicapped by problems of water supply and maintaining steam pressure. In 1801, Richard Trevithick built and demonstrated his Puffing Devil road locomotive, believed by many to be the first demonstration of a steam ­powered road vehicle. It was unable to maintain sufficient steam pressure for long periods. Sentiment against steam ­powered road vehicles led to the Locomotive Acts of 1865. In 1807 Nicephore Niepce and his brother Claude probably created the world's first internal combustion engine which they called Pyreolophore. What is meant by "Sentiment" in the context of the given paragraph?