Bissoy.com
Doctors Medicines MCQs Q&A

The distance between center of fasteners shall not be less than Y times the nominal diameter of the fastener, where Y is:

The distance between center of fasteners shall not be less than Y times the nominal diameter of the fastener, where Y is: Correct Answer <span style="">2.5</span>

Explanation:

Pitch and gauge:

The distance between the centers of rivet holes measured along the applied stress is known as Pitch, whereas the distance the center of rivet holes measured perpendicular to the direction of the applied stress is known as Gauge.

[ alt="F2 N.M Madhu 19.02.20 D4" src="//storage.googleapis.com/tb-img/production/20/02/F2_N.M_Madhu_19.02.20_D4.png" style="width: 372px; height: 143px;">

As per IS 800, the minimum pitch specified is 2.5 times the nominal diameter of rivet.

Related Questions

Simplify the value of $$\frac{{{\text{0}}{\text{.9}} \times {\text{0}}{\text{.9}} \times {\text{0}}{\text{.9 + 0}}{\text{.2}} \times {\text{0}}{\text{.2}} \times {\text{0}}{\text{.2 + 0}}{\text{.3}} \times {\text{0}}{\text{.3}} \times {\text{0}}{\text{.3}} - {\text{3}} \times 0.9 \times {\text{0}}{\text{.2}} \times {\text{0}}{\text{.3}}}}{{{\text{0}}{\text{.9}} \times {\text{0}}{\text{.9 + 0}}{\text{.2}} \times {\text{0}}{\text{.2 + 0}}{\text{.3}} \times {\text{0}}{\text{.3}} - 0.9 \times {\text{0}}{\text{.2}} - {\text{0}}{\text{.2}} \times {\text{0}}{\text{.3}} - 0.3 \times 0.9}} = ?$$
$$\frac{{38 \times 38 \times 38 + 34 \times 34 \times 34 + 28 \times 28 \times 28 - 38 \times 34 \times 84}}{{38 \times 38 + 34 \times 34 + 28 \times 28 - 38 \times 34 - 34 \times 28 - 38 \times 28}}$$            is equal to = ?
Mohan traveled five cities (A, B, C, D and E) starting from home by a car which has a mileage such that the car can travel 10 km in 1 liter petrol. Distance between city A and B is twice the distance between home to city A. Distance between city B and C is thrice the distance between home to city A. Distance between city C and D is 100. Distance between city D and E is 1.5 times than the distance between B and C. Average distance traveled by Mohan was 41 km between five cities. Find how much petrol was needed by Mohan to travel from city B to D.
From the given table, what is the percentage of students scoring 40 or more, but less than 70. Scores Less than 20 Less than 30 Less than 40 Less than 50 Less than 60 Less than 70 Less than 80 No. of Students 12 19 22 31 38 46 50
Consider the following statements for the design of a laced column: 1) In a bolted construction, the minimum width of the lacing bar shall be three times the nominal diameter of the end bolt. 2) The thickness of the flat of a single lacing system shall be not less than one-fortieth of its effective length 3) The angle of inclination of the lacing bar should be less than 40° with the axis of the built-up column 4) The lacing shall be designed for a transverse shear of 2.5% of the axial load on the column Which of the above statements are correct?
From the following table, how many patients were in the age group 40 – 60? Age (years) Less than 10 Less than 20 Less than 30 Less than 40 Less than 50 Less than 60 Less than 70 No. of patients 11 15 22 29 35 45 50
Each of the question below consists of a question and three statements number I, II and III given below it. You have to decide whether the data provided in the statement are sufficient to answer the question. If the bus is travelling from Surat to Ahmadabad and a car is travelling from Ahmadabad to Surat, then what is the distance between Surat and Ahmadabad? I. The speed of a car is 40% less than the speed of bus. Bus started at 9 am and car started at 10 am and they meet at 3 pm of the same day. II. After travelling for 1 hour, because of traffic average speed of bus is decreased by 20% and covers distance between Surat to Ahmadabad in 11 hours. Original speed of car is 20% less than original speed of bus and before crossing bus it covered 200 km if starts 1 hour later than bus. After crossing car, bus covers remaining distance in 5 hours. III. Speed of bus is 10 km/hr more than the speed of car and before crossing car ratio of distances covered bus and car in same time was 5 : 4. Time taken by car to cover the distance between Ahmadabad and Surat is 2 hours 15 minutes more than time taken by bus to cover the same distance.
Amit travels a certain distance with 3 bikes- A, B and C. The speed of bike C is 1 km/hour less than the speed of bike B, the speed of bike B is one less than the bike A. Amit travelled 330 km with bike A. He travelled a distance which is 120 km less than the previous distance of bike B and the distance he travelled on bike C was 60 km more than the distance he travelled at bike B. He took a total time of 81 hours to travel the entire distance on 3 bikes. Find the speed of bike A?
If a fastener is threaded into a tapped hole, then the fastener is likely to be called as
A call center company had to arrange transportation for its employees. They asked for quotes from different provider agencies and the following are the options they got: A. This option allows having uniform rate for day and night trips. This would cost you Rs.1000 per trip. B. This option has differential fare for day and night trips. Day trips would cost 700 per trip and night trips would be charged 1200 per trip. C. This option charges depending on the total distance covered in a trip. It charges Rs.800 per trip if trip distance is more than 50 KM and Rs.1100 if trip distance is less than 50 KM. If the company has 3 night trips and all less than 50 KM and 3 day trips less than 50 KM, which would be the best option?