Bissoy.com
Doctors Medicines MCQs Q&A

For a given fractional change of speed, if the displacement of the sleeve is high, then the governor is said to be

For a given fractional change of speed, if the displacement of the sleeve is high, then the governor is said to be Correct Answer Sensitive

  • Consider two governors A and B running at the same speed
  • When this speed increases or decreases by a certain amount, the lift of the sleeve of governor A is greater than the lift of the sleeve of governor B
  • It is then said that the governor A is more sensitive than the governor B
  • In general, the greater the lift of the sleeve corresponding to a given fractional change in speed, the greater is the sensitiveness of the governor
  • The sensitiveness is defined as the ratio of the difference between the maximum and minimum equilibrium speeds to the mean equilibrium speed
  • A governor is said to be isochronous when the equilibrium speed is constant (i.e. the range of speed is zero) for all radii of rotation of the balls within the working range, neglecting friction
  • The isochronism is the stage of infinite sensitivity
  • A governor is said to be hunt if the speed of the engine fluctuates continuously above and below the mean speed
  • This is caused by a too sensitive governor which changes the fuel supply by a large amount when a small change in the speed of rotation takes place
  • A governor is said to be stable when for every speed within the working range there is a definite configuration i.e. there is only one radius of rotation of the governor balls at which the governor is in equilibrium
  • For a stable governor, if the equilibrium speed increases, the radius of governor balls must also increase

Related Questions

A Porter governor has equal arms each of length 250 mm and pivoted on the axis of rotation. Each ball has a mass of 5 kg and the central load has a mass on the sleeve of 25 kg. The radius of rotation of the ball is 150 mm when the governor begins to lift and 200 mm when the governor is at maximum speed. Neglecting friction at the sleeve, find the sleeve lift.
A Porter governor has equal arms each of length 250 mm and pivoted on the axis of rotation. Each ball has a mass of 5 kg and the central load has a mass on the sleeve of 25 kg. The radius of rotation of the ball is 150 mm when the governor begins to lift and 200 mm when the governor is at maximum speed. Neglecting friction at the sleeve, find the governor effort.
A Porter governor has equal arms each of length 250 mm and pivoted on the axis of rotation. Each ball has a mass of 5 kg and the central load has a mass on the sleeve of 25 kg. The radius of rotation of the ball is 150 mm when the governor begins to lift and 200 mm when the governor is at maximum speed. Neglecting friction at the sleeve, find the power of the governor in N-m.
A Porter governor has equal arms each of length 250 mm and pivoted on the axis of rotation. Each ball has a mass of 5 kg and the central load has a mass on the sleeve of 25 kg. The radius of rotation of the ball is 150 mm when the governor begins to lift and 200 mm when the governor is at maximum speed. Considering friction at the sleeve of 10N, find the governor effort.
A Porter governor has equal arms each of length 250 mm and pivoted on the axis of rotation. Each ball has a mass of 5 kg and the central load has a mass on the sleeve of 25 kg. The radius of rotation of the ball is 150 mm when the governor begins to lift and 200 mm when the governor is at maximum speed. Considering friction at the sleeve of 10N, find the power of the governor in N-m
A Porter governor has equal arms each of length 250 mm and pivoted on the axis of rotation. Each ball has a mass of 5 kg and the central load has a mass on the sleeve of 25 kg. The radius of rotation of the ball is 150 mm when the governor begins to lift and 200 mm when the governor is at maximum speed. Considering friction at the sleeve of 10N, find the range of speed in rpm.
What is the distance covered by boat N upstream in 5 hours? Which of the following option is sufficient alone to find the answer? A) Boat M is travelling downstream with 20% more downstream speed of boat N. Speed of boat M in still water is 10% more than the speed of boat N in still water. B) Boat M and Boat N are travelling downstream with speed 33 km/hr and 40 km/hr respectively and speed of boat M is still water is 2 times the speed of stream. C) Speed of boat M in still water is 6 km/hr less then speed of boat N in still water and speed of stream is 10 km/hr. D) Speed of stream is ½ times the speed of boat N in still water and downstream speed of boat M is 44 km/hr. E) Speed of stream is 10 km/hr and ratio of upstream speed of boat M and boat N is 3 : 2 respectively.
Give the correct sequence of preparing a puff sleeve with band and its attachment to the garment.
1. Gathering of cap line.
2. Stitching underarm seam of sleeve.
3. Finishing of band.
4. Flattering of band.
5. Gathering of lower underarm of sleeve.
6. Attaching the band.
7. Attaching sleeve in the armhole.
For two governors A and B, the lift of sleeve of governor A is more than that of governor B, for a given fractional change in speed. It indicates that
A passage is given with five questions following it. Read the passage carefully and select the best answer to each question out of the given fouralternatives. Teaching about compassion and empathy in schools can help deal with problems of climate change and environmental degradation,” says Barbara Maas, secretary,
Standing Committee for Environment and Conservation, International Buddhist Confederation (IBC). She was in New Delhi to participate in the IBCs governing
council meeting, December 10-11, 2017. “We started an awareness campaign in the year 2005-2006 with H H The Dalai Lama when we learnt that tiger skins were
being traded in China and Tibet. At that time, I was not a Buddhist; I wrote to the Dalai Lama asking him to say that this is harmful and he wrote back to say, “We
will stop this.” He used very strong words during the Kalachakra in 2006, when he said, If he sees people wearing fur and skins, he doesnt feel like living. This sent
huge shock waves in the Himalayan community. Within six months, in Lhasa, people ripped the fur trim of their tubba, the traditional Tibetan dress. The messenger was ideal and the audience was receptive,” says Maas who is a conservationist. She has studied the battered foxs behavioral ecology in Serengeti,Africa. She heads the endangered species conservation at the Nature and Biodiversity Conservation Union (NABU) International Foundation for Nature, Berlin. “I metSamdhong Rinpoche, The Karmapa, HH the Dalai Lama and Geshe Lhakdor and I thought, if by being a Buddhist, you become like this, I am going for it, “says Maas, who led the IBC initiative for including the Buddhist perspective to the global discourse on climate change by presenting the statement, The Time to Act is Now: aBuddhist Declaration on Climate Change, at COP21 in Paris. “It was for the first time in the history of Buddhism that leaders of different sanghas came together to take a stand on anything! The statement lists a couple ofimportant things: the first is that we amass things that we dont need; there is overpopulation; we need to live with contentment and deal with each other and theenvironment with love and compassion,” elaborates Maas. She is an ardent advocate of a vegan diet because “consuming meat and milk globally contributes more toclimate change than all "transport in the world.” Turning vegetarian or vegan usually requires complete change of perspective before one gives up eating their favorite food. What are the Buddhist ways to bringabout this kind of change at the individual level? “To change our behavior, Buddhism is an ideal vehicle; it made me a more contented person,” says Maas, who grewup in Germany, as a sausage chomping, meat-loving individual. She says, “If I can change, so can anybody”. Why did Ms. Barbara Mass say “If I can change, so can anybody”?