Bissoy.com
Doctors Medicines MCQs Q&A

In a forced draft cooling tower, the fan is fixed at the:

In a forced draft cooling tower, the fan is fixed at the: Correct Answer Bottom of the cooling tower

Explanation:

In forced draft cooling tower, a centrifugal fan is used. Its function is to draw air from outside and force it to top of the cooling tower. Fans are located at the side or at the bottom of the cooling tower.

[ alt="ALP RAC 18 7Q Cooling Tower and Water Treatment Hindi - Final images Q4" src="//storage.googleapis.com/tb-img/production/19/01/ALP%20RAC_18_7Q_Cooling%20Tower%20and%20Water%20Treatment_Hindi%20-%20Final_images_Q4.PNG">

Related Questions

Consider the following statements for cooling towers: 1. Cooling tower is an artificial device used to cool the hot cooling water coming out of condenser more effectively. 2. The amount of water usually lost with induced draft cooling tower ranges from 5% to 6% by evaporation. 3. The amount of water usually lost with induced draft cooling tower ranges from 7% to 8% by drift losses. 4. The rate of evaporation of water and its cooling effect on the remaining water depends upon the relative humidity of air passing through the tower. Which of the above statements are correct?
Shikha went to the market to purchase five fans. The cost of the first fan is 25% more than the second fan and price of third fan is 20% less than fourth fan and price of fifth fan is 16% more than price of fourth fan. Price of the fourth fan is 3/4th of the second fan’s price. If the average cost of the first three fans was Rs.35 more than of the last three fans. What is  the cost of the second costliest fan?
A fan running at a speed of 280 rpm circulates 105 m3/s of air in a mine. If the power input to the motor for driving the fan is recorded to be 75 kW, with the combined efficiency of fan and motor at 70%. If the fan pressure is to be increased by 200 Pa by changing the fan speed. the fan speed in rpm will become
Mechanical draft cooling tower size is ________ the size of the natural draft cooling tower.
In a certain city there are five towers. Tower III is taller than tower II. Height of Tower V is the average of the height of towers I and IV. Height of Tower II is the average of the height of towers I and III. Height of Tower I is the average of the height of towers II and V. Which tower is the shortest?
The fan drift pressure readings and fan quantities are measured to be 500 Pa and 65 m3/s respectively at the time when NVP aids fan pressure. On reversal, the fan delivers a quantity of 50 m3/s while acting against NVP with fan drift pressure of 600 Pa. Assuming that the NVP remains constant in both cases the total resistance of the mine in Ns2/m8 will be
A mine ventilation system consists of two splits A and B with resistances of 0.8 Ns2m-8 and 3.2 Ns2m-8, respectively as shown in figure. Trunk airways have resistance of 0.2 Ns2m-8. The main mine fan is generating pressure of 500 Pa.
Mine Ventilation mcq question image
The flows in the two splits are equalized by placing a booster fan in split B. Assume that the fan pressure does not change after installation of the booster fan. The size of the booster fan in Pa is
The capacity of induced draft fan compared to forced draft fan in a boiler is
If in a city, the maximum daily draft is 25MLD, fire draft is 35MLD and maximum hourly draft is 40MLD, what is the coincident draft?
The maximum harbour depth below lowest low water is generally equal to
(i) loaded draft + 1.2 m when bottom is rock
(ii) loaded draft + 1.8 m when bottom is soft
(iii) loaded draft + 1.2 m when bottom is soft
(iv) loaded draft + 1.8 m when bottom is rock