Bissoy.com
Doctors Medicines MCQs Q&A

Extrusion is the process of

Extrusion is the process of Correct Answer Pushing the heated billet of metal through the orifice

Concept:

Extrusion is a compressive deformation process in which a block of metal (heated billet or slug of metal) is squeezed through an orifice or die opening in order to obtain a reduction in diameter and increase in the length of the metal block. The resultant product will have the desired cross-section. Extrusion involves forming of axisymmetric parts. Dies of circular on non-circular cross-section are used for extrusion.

[ alt="RRB JE ME 10 5Q 27thAug 2015 Shift3 Hindi images Q1" src="//storage.googleapis.com/tb-img/production/19/02/RRB_JE_ME_10_5Q_27thAug_2015_Shift3_Hindi_images_Q1.PNG" style="width: 494px; height: 182px;">

Related Questions

The extrusion ratio for hot extrusion is much more than the extrusion ratio for cold extrusion.
If the effective flow stress for extrusion is 100 MPa and the extrusion ratio is 4, then find the ideal extrusion pressure for the process?
The pressure required to maintain flow during indirect extrusion
P. decreases with decreasing rate of the billet
Q. Increases with increasing extrusion ratio
R. is independent of the length of the billet
S. is independent of the extrusion ratio
The force required for in direct extrusion is ____________ direct extrusion process.
The plot between the extrusion pressure vs. the ram travel is plotted. Find the correct combination of direct and indirect extrusion process relationship?
A round billet made of 70-30 brass is extruded at a temperature of 675°C. The billet diameter is 125 mm, and the diameter of the extrusion is 50 mm. Calculate the extrusion force required.
If the extrusion ratio of the material used is increased by two times, the required extrusion pressure _____________
The maximum stress/force that can be applied on the billet is more in indirect extrusion compared to direct extrusion.
The capacity of the vertical extrusion press is more than the horizontal extrusion press.
Find the extrusion pressure for the metal having extrusion constant 5*109. The initial and final cross-sectional area is 50 mm2 and 10 mm2?