Bissoy.com
Doctors Medicines MCQs Q&A

The frequency of AC supply in India

The frequency of AC supply in India Correct Answer 50 Hz

  • As per Indian standard for our domestic power supply we us A.C current, which is also known as alternating current, since they change its polarity at a certain interval of time.
  • Now the two principal properties of the A.C electric power supply are Voltage and frequency.
  • And we use 220 V and 50 Hz power supply for our common domestic use
  • Where 220 V is potential difference and 50 Hz is its frequency

Related Questions

In an AM system receiver. the mixer translates the carrier frequency fc to a fixed intermediate frequency of 450 kHz. Given a broadcast signal of frequency 900 kHz. What is the corresponding image frequency when a superhetrodyne receiver is employed with local oscillator frequency greater than the broadcast signal frequency?
X' agreed to supply 1000 tons of iron at Rs. 100 per ton to 'Y' to be delivered not later than 31st January, 2002. 'X' also entered into a contract with 'A' for purchase of 1000 tons of iron at Rs. 80 per ton telling 'A' clearly that the iron is needed before 31st January, 2002 for supply to 'Y' to fulfil the contract with Y. 'A' fails to supply the iron to 'X' who in tum failed to supply the same to 'Y'. In an action by 'X' against 'A'.
The different age group people go for a morning walk. The age of 20 people who go for a morning walk is as follows: 19, 15, 34, 45, 69, 74, 24, 67, 77, 89, 91, 45, 65, 35, 56, 67, 55, 23, 78, 52 The Grouped frequency distribution table of above will be: (A)  S. No Class Frequency 1 0-20 2 2 20-40 4 3 40-60 5 4 60-80 7 5 80-100 2 (B)  S. No Class Frequency 1 0-20 3 2 20-40 3 3 40-60 5 4 60-80 6 5 80-100 3 (C) S. No Class Frequency 1 0-20 2 2 20-40 4 3 40-60 5 4 60-80 5 5 80-100 4 (D) S. No Class Frequency 1 0-20 2 2 20-40 7 3 40-60 2 4 60-80 7 5 80-100 2
A source of unknown frequency gives 4 beats / s, when sounded with a source of known frequency 250 Hz. The second harmonic of the source of unknown frequency gives five beats per second, when sounded with a source of frequency 513 Hz. The unknown frequency is:
In active power and frequency control, a. Frequency should remain constant b. A considerable drop in frequency could result in low magnetizing currents in induction motors and transformers. c. The frequency of a system is dependent on reactive power balance. d. Relatively closed control of frequency ensures constancy of the speed of induction motors. Which of the above statements are incorrect?
The frequency response of the filter in the stop band. i. Decreases with increase in frequency ii. Increase with increase in frequency iii. Decreases with decrease in frequency iv. Increases with decrease in frequency
An audio signal (say from 50 Hz to 10000 Hz) is frequency translated by a carrier having a frequency of 106 Hz. The values of initial (without frequency translation) and final (after frequency translation) fractional change in frequency from one band edge to the other are
In case of synchronous motor, which of the following are true? a. Synchronous motor is not self-starting b. If the rotor poles are excited by field current and the stator terminals are connected to AC supply, motor vibrates. c. Variable frequency supply is used to start synchronous motor. d. By using frequency converter, a synchronous motor can be brought from standstill to its desired speed.
An oscilloscope is powered from 230 V mains having a nominal frequency of nearly 50 Hz. The triggering mode of the oscilloscope is set to LINE. A square wave from a function generator is fed to the Y input and a stable display (properly triggered) is obtained when the frequency of the function generator is 297 Hz. The actual frequency of the power supply is
Consider the following statements regarding modulation : 1. The communication systems, where a weak signal is transmitted by the use of a modulation is essential in carrier signal. 2. When the frequency of the high frequency signal is varied in accordance with the intensity of the low-frequency weak signal, the modulation is said to be frequency modulation. 3. The process of recovering original baseband signal from the modulated signal is called phase modulation. Which of the above statements are correct ?