Related Questions

The length of the needle beam used in needle beam method of tunnelling is usually
A 2 m to 4 m
B 2.5 m to 6 m
C 4 m to 7 m
D 5 m to 6 m
If a copper disc is rotated rapidly below a freely suspended magnetic needle, the magnetic needle shall start rotating with a velocity
A less than that of disc but in opposite direction
B equal to that of disc and in the same direction
C equal to that of disc and in the opposite direction
D less than that of disc and in the same direction
"It has a gauge that tells you when you are running low on gases"Which pair fits to label the (gauge,low) parts of the sentence?
A adjective,adverb
B noun,adverb
C noun,adjective
D adjective,adjective
A machine P can print out one lakh books in 8 hours. Machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines are started at 9 A.M.While machine P is stopped at 11 A.M. and remaining two machines completed the work. Approximately at what at what time will the work time (to print one lakh books) be finished?
A 11.30 Am
B 12 Noon
C 12.30 Pm
D 11.35 am
A small factory with 3 machines has a job of stamping out a number of pan covers. The newest machine can do the job is 3 days, another machine can do it in 4 days, and the third machine can do it in 6 days. How many days will the factory take to do the job using all the machine?
A 1.333
B 4.333
C 6
D 13
A machine P can paint one lakh books in 8 hours; machine Q can print the same number of books in 10 hours while machine R can print them in 12 hours. All the machines started operating at 9 A. M. while machine P is stopped at 11 A. M. and the reamaining two machines completed the work. Approximately at what time will the work (to print one lakh books) be finished?
A 11:30 A. M
B 12:00 noon
C 12:30 P. M.
D 1:00 P. M.
Three years ago, a machine was bought for Tk 1,00,000. The installation cost was Tk 20,000. The machine was depreciated in a straight line method at 20% per year. At the end of the 3rd year, the machine was sold for Tk 46,000. What is the gain/loss from sale of this machine?
A gain of Tk 2,000
B gain of Tk 6.000
C loss of Tk 2,000
D loss of Tk 6,000
E None of these
The standard length of rail for Broad Gauge and Meter Gauge are respectively
A 12 m and 12 m
B 12 m and 13 m
C 13 m and 12 m
D 13 m and 13 m
To ensure exact gauge, the gauge tie plates are provided at
A toe of the switch
B nose of crossing
C both (A) and (B)
D none of the above
In a shipment of 120 machine parts, 5 percent were defective. In a shipment of 80 machine parts, 10 percent were defective. For the two shipments combined, what percent of the machine parts were defective?
A 6.5%
B 7%
C 7.5%
D 8.0%

Next steps