Related Questions

The rectangular beam 'A' has length ‘l’, width ‘b’ and depth ‘d’. Another beam 'B' has the same length and depth but width is double that of 'A'. The elastic strength of beam 'B' will be _________ as compared to beam ‘A’.
A Same
B Double
C Four times
D Six times
A simply supported beam 'A' of length l, breadth b, and depth d carries a central point load W. Another beam 'B' has the same length and depth but its breadth is doubled. The deflection of beam 'B' will be __________ as compared to beam 'A'.
A One-fourth
B One-half
C Double
D Four times
The rectangular beam 'A ' has length l, width b and depth d. Another beam 'B' has the same width and depth but length is double that of 'A'. The elastic strength of beam 'B' will be __________ as compared to beam A.
A Same
B One-half
C One-fourth
D One-eighth
The rectangular beam 'A' has length l, width b and depth d. Another beam 'B' has the same length and width but depth is double that of 'A'. The elastic strength of beam B will be __________ as compared to beam A.
A Same
B Double
C Four times
D Six times
The earth area covered by a satellite radio beam.
A Beamwidth
B Bandwidth
C Footprint
D Zone
Why does the ionosphere of the Earth's atmosphere facilitate radio communication? i. The presence of ozone causes the reflection of radio waves to earth ii. Radio waves have a very long wavelength
A i only
B ii only
C both i & ii
D neither i nor ii
A simply supported beam which carries a uniformly distributed load has two equal overhangs. To have maximum B.M. produced in the beam least possible, the ratio of the length of the overhang to the total length of the beam, is
A 0.207
B 0.307
C 0.407
D 0.508
The simply supported beam 'A' of length '$$l$$' carries a central point load 'W'. Another beam 'B' is loaded with a uniformly distributed load such that the total load on the beam is 'W'. The ratio of maximum deflections between beams 'A' and 'B' is
A $$\frac{5}{8}$$
B $$\frac{8}{5}$$
C $$\frac{5}{4}$$
D $$\frac{4}{5}$$
The ratio of maximum shear stress developed in a rectangular beam and a circular beam of the same cross-sectional area is
A $$\frac{2}{3}$$
B $$\frac{3}{4}$$
C 1
D $$\frac{9}{8}$$
‘P’ is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is ‘A’ and sectional modulus is ‘Z’. The minimum stress ‘f’ on the beam subjected to a maximum bending moment ‘M’ is
A $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{Z}}}{{\text{M}}}$$
B $${\text{f}} = \frac{{\text{A}}}{{\text{P}}} - \frac{{\text{M}}}{{\text{Z}}}$$
C $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{\text{Z}}}$$
D $${\text{f}} = \frac{{\text{P}}}{{\text{A}}} - \frac{{\text{M}}}{{6{\text{Z}}}}$$

Next steps