Thin walled pressure vessels are to be made either from Material A and B. If the applied stress is 1.2 times higher when material A is used and (KIC)A = 0.6(KIC)B (where, KIC denotes plain strain fracture toughness). The ratio of critical crack lengths in material A and B will be

Thin walled pressure vessels are to be made either from Material A and B. If the applied stress is 1.2 times higher when material A is used and (KIC)A = 0.6(KIC)B (where, KIC denotes plain strain fracture toughness). The ratio of critical crack lengths in material A and B will be Correct Answer $$\frac{1}{4}$$

Bissoy MCQ

Related Questions

From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
In the case of plane strain, the relationship between the fracture toughness and crack extension force is given as _______ (where K is the fracture toughness, δ is the crack extension force, ν is the poison’s ratio, and E is the young’s modulus).
According to the fracture theory of the material, the critical value of the crack extension force, which makes the crack propagate to the fracture is called the fracture toughness of the material.
In the case of plane stress, the relationship between the fracture toughness and crack extension force is given as _______ (where K is the fracture toughness, δ is the crack extension force, and E is the young’s modulus).
Simplify the value of $$\frac{{{\text{0}}{\text{.9}} \times {\text{0}}{\text{.9}} \times {\text{0}}{\text{.9 + 0}}{\text{.2}} \times {\text{0}}{\text{.2}} \times {\text{0}}{\text{.2 + 0}}{\text{.3}} \times {\text{0}}{\text{.3}} \times {\text{0}}{\text{.3}} - {\text{3}} \times 0.9 \times {\text{0}}{\text{.2}} \times {\text{0}}{\text{.3}}}}{{{\text{0}}{\text{.9}} \times {\text{0}}{\text{.9 + 0}}{\text{.2}} \times {\text{0}}{\text{.2 + 0}}{\text{.3}} \times {\text{0}}{\text{.3}} - 0.9 \times {\text{0}}{\text{.2}} - {\text{0}}{\text{.2}} \times {\text{0}}{\text{.3}} - 0.3 \times 0.9}} = ?$$
$$\frac{{38 \times 38 \times 38 + 34 \times 34 \times 34 + 28 \times 28 \times 28 - 38 \times 34 \times 84}}{{38 \times 38 + 34 \times 34 + 28 \times 28 - 38 \times 34 - 34 \times 28 - 38 \times 28}}$$            is equal to = ?
Fracture stress for a brittle material having a crack lenght of 1μm is 200 MPa. Fracture stress for the same material having a crack lenght of 4 μm is
The young’s modulus of the steel is 600 MPa, and the plastic stress required to extend the crack is 50*10-9, and the initial crack length is 2 microns. Find the fracture stress required to crack the material?
At higher temperature, if higher frequency of stress cycle is applied on the material, fracture will be ___________ and at lower frequency of stress, the fracture will be ___________
The crack propagation rate with stress is given as ______ Where; -> da/dN is crack growth with each cycle -> C is constant -> σm is mean stress -> σa is alternating stress -> a is the crack length -> m and n are constant